ANVILSMakes Miniature Metal Work Easier.
Anvils are extremely helpful when riveting, forming, shaping, bending, embossing, drilling or flattening metal...and whenever you need a hard working surface.
Can also be used for removing small friction-fit pinions, gears and wheels from shafts and axles. Case hardened tool-steel ground flat and smooth. 15 holes graduated from 1/32 inch to 1/4 inch and 5 milled slots. 1-5/8 inches across flats. 3/4 inch thick.
made of steel with chrome plated surface. 3/4 inch wide x 4-1/2 inches long x 3 inches high.
|83437||PRECISON GROUND ANVIL
Top and side surfaces ground flat and square. Use standing upright or laying on side. Main body is approximately 2-1/2 inches long x 1-1/4 inches wide x 1-3/4 inches high. 2 conical ends are each 1-1/4 inches long. 3/8-16 threaded hole in base permits secure mounting to workbench.
|16101||MINI BENDING BRAKE
Produces Sharp, Clean Bends in Metal.
A press bending brake for brass or other light sheet metals. Makes bends up to 90 degrees (depending on how far you tighten the press screws). Will bend up to .020 inch half hard brass, 3 inches wide. Can also be used on plastic. Adjustable depth guide permits duplication of bend placement. Includes reversible steel die and instructions. A beautifully made tool. Overall size: 4 inches wide x 1-1/2 inches deep x 4 inches high.
|60346||VISE-MOUNTED WIRE BENDER
Make Perfect Bends Even in Hard Music Wire.
Wire, rod and strip bender makes angles, loops, eyes, U, C and S shapes in brass, copper, and steel, quickly and easily. Even bends the hardest music wire up to 1/8 inch diameter. Made of steel with rust resistant black oxide finish and hardened radius pins. 7 inch-long arm and rubber grip gives extra leverage for tough materials. Must be locked in a vise during use.
|60360||5-PIECE SPRING TYPE TUBE BENDER SET
No-Kink Benders for Small Tubing.
Spring type benders with 'funnel' ends let you make smooth, no-kink bends in small diameter brass, copper and aluminum tubing. Simply insert tubing into spring, make your bend, and then slide spring off. 5-piece set bends 1/16 inch, 3/32 inch, 1/8 inch, 5/32 inch and 3/16 inch outside diameters. Nickel plated steel.
Professional Quality Bending Machine Forms Smooth Curves in Wood, Plastic and Metal.
There's never been a better, easier-to-use tool for making perfect bends in ship model planking. Works on wood strips up to 2-1/4 inches wide and 1/8 inch thick...even plywood! But that's not all: it will also make smooth, no kink curves in plastic and metal strip stock and in 1/16 inch, 3/32 inch and 1/8 inch tubing and soft wire. Simply set the rollers for the desired radius and turn the crank to feed and form the material. You can even create perfect radius curves in model railroad rail from N through O scales. Precision machined of aluminum with steel gears. Rollers are 1/2 inch diameter by 3 inches long.
|82816||DELUXE BENDING DIE SET, 4 INCH
Turn Your Bench Vise into a Powerful Bending Brake.
Position this cast steel die set on the jaws of your bench vise to convert it into a powerful sheet metal bending brake. Bends sheet metal up to 90 degrees. Strong magnets and alignment tabs keep dies in place. Fits most large workbench vises. 4 inch wide x 1 inch high deluxe version has repositionable steel dies in different widths. Useful for making boxes and other special shapes which require two-directional bending.
|82817||18 INCH BENDING BRAKE
Form and Bend Metal with Our Mini Bending Brake.
This versatile bending brake makes clean, smooth bends up to 90 degrees in metal up to 16 gauge thick and 18 inches long. And by cutting slots in the brake bar with a hack saw, you can form boxes, covers, trays, etc. with flanged edges up to 1 inch. Adjustments for stock thickness, sharpness of bends, and accuracy in bending duplicate pieces are quick and easy to make. Rugged construction and simple design assure a lifetime of trouble-free service. (C clamps sold separately.)
Bend Metal Wire and Strip into Complex Shapes with Ease.
Our Universal Bending Machine bends wire and strip into smooth curves, in multiple planes, and into complex shapes, including S-curves, squares and coils. Use it on wire up to 5/16 inch dia. and strip up to 1 inch wide. Clamps into workbench-mounted vise, or can be bench-mounted with 5/16 inch bolts (not included). Set includes 3/16, 1/4, 1/2 and 1 inch dia. circle pins, 12 inch long lever with rubberized grip, follower tool, and two stop pins for making duplicate parts. Overall size: 9 inches long x 3-1/2 inches high x 2-1/2 inches wide (not including lever). Made of rust-protected steel.
|83372||MISSION MODELS MULTI-TOOL, SMALL
Multi-Tool Forms Smooth, Consistent Curves in Detail Parts.
Use this machined mandrel to form precise radial bends in photo etched parts and other thin materials. Just use your fingers to roll the part around the diameter you need. The graduated conical tip provides an easy, accurate way to gauge multiple parts for uniformity. And you can use the rounded tip to burnish dry transfer lettering. Made of anodized aluminum with white markings for long life. 7 inches long.
Small Multi-Tool bends diameters of .375, .325, .275, .225, .175, .100 and .047 inch.
|81530||POWER PUNCH TOOL KIT
Punch Accurate Holes in Plastic, Wood, Metal and More.
Use our Power Punch Tool to punch accurate round holes through all types of materials, from thin shim brass and plastic sheet through 16 gauge (.050 inch thick) mild steel. The adjustable edge guide lets you align holes in a straight line 1/4 inch to 1-1/2 inches from the edge of your workpiece. Includes seven quick-change, hardened punch-and-die sets in the following diameters: 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 and 9/32 inch. Punch opens to 1/4 inch; throat depth: 1-3/4 inches. Includes a molded plastic case for safe storage.
|81652||5/16 INCH CORNER PUNCH
90 Degree Punch Makes Corner Cutting Fast.
This ingenious tool cuts a perfect 90 degree corner in wood and plastic. It's ideal for cutting window and door openings in model siding and structural materials. Simply mount the punch in your drill press and pull the handle. Or, just tap the punch with a hammer. Step and repeat the operation, and your job is complete with improved accuracy in 1/10th the time. Also good for cleaning out routed corners, trimming dollhouse openings, cutting square holes for model airplane construction...and any time a precise 90 degree corner is needed. Made of tool steel with razor-sharp cutting edges. Can be resharpened easily on any honing stone. 5/16 inch cutting edges x 2-1/2 inches long. 1/4 inch diameter at the holding end.
|82390||3-PIECE REDUCING PUNCH SET
Repair Oversize Holes.
It happens to the best of us...the hole we drilled is just a little too big for its mating part. Fortunately, our Reducing Punch Set makes the repair easy: Just place the ball end over the hole and tap with a hammer. The punch deforms the edge of the hole to reduce its diameter. Use for pressing flywheels onto motor shafts, mounting dowel pins in fixtures, reducing excessive play in linkages, etc. Also creates 'dome-type' features in metal sheet. Set of three hardened steel punches (1/2 inch, 5/8 inch and 3/4 inch dia.) accommodates hole sizes from 1/16 inch thru 5/8 inch dia. 1/4 inch diameter steel handles. 4 inches long.
|82394||3/16 INCH CORNER PUNCH
90 Degree Punch Makes Corner Cutting Easy.
This ingenious tool cuts a perfect 90 degree corner in wood and plastic. It's ideal for cutting window and door openings in model siding and structural materials. Simply mount the punch in your drill press and pull the handle. Or, just tap the punch with a hammer. Step and repeat the operation, and your job is complete with improved accuracy in 1/10th the time. Also good for cleaning out routed corners, trimming dollhouse openings, cutting square holes for model airplane construction...and any time a precise 90 degree corner is needed. Made of tool steel with razor-sharp cutting edges. Can be resharpened easily on any honing stone. 3/16 inch cutting edges x 2-1/2 inches long. 3/16 inch diameter at the holding end.
|82524||REVOLVING TURRET HOLE PUNCH
Revolving Punch Cuts Perfect Holes.
Revolving turret-head punch cuts easily through leather, plastic, canvas, cardboard...even thin wood veneers. Cuts hole sizes 5/64 inch, 3/32 inch, 7/64 inch, 1/8 inch, 5/32 inch and 3/16 inch. Blackened steel with tempered steel punches, brass anvil and vinyl grips.
|83281||13-PIECE DRIVE AND CENTER PUNCH SET
13-piece set has 8 drive punches from 1/16 inch thru 5/16 inch for removing roll, taper and dowel pins, plus five center punches from 1/16 inch to 5/32 inch to mark hole locations for wander-free drilling. All punches are hardened and tempered for durability and chemically blackened for rust-resistance. Set includes handy vinyl storage wallet with snap closures and clear markings.
|83513||MICRO PUNCH SET
Ideal for Making Miniature Gauges, Lenses, Washers, Gaskets and More.
Toolmaker-grade micro punch set makes perfect miniature disks from plastic, wood veneer, cloth -- even metal! And it punches tiny holes in materials virtually impossible to drill: thin metal sheet, cork, rubber, vinyl, and more. Use it on pre-printed paper gauge-faces and clear acetate sheet to create the most realistic miniature instrument panels you've ever seen. Also makes custom size washers and miniature gaskets. Easy to use: Just place the material between the clear guide plate and the perfectly matched hardened steel die, then insert the punch and tap through. Includes 9 precisely ground and hardened steel punches ranging from 1.0 mm (0.039 inch) to 5.0 mm (0.197 inch) diameter in 0.5 mm (0.0197 inch) increments. Approx. overall size: 1-1/4 inches x 2-5/8 inches.
|83539||'PRESS-IT' PRECISION ARBOR/PUNCH PRESS
A Precision Arbor Press for Delicate Work.
Press-It is a sensitive arbor/punch press that is small enough to give you the delicate touch needed for working with fine model, instrument and clock parts, yet sturdy enough to apply 250 lbs. of force. Use for press-fitting small parts together and for removing gears and wheels from axles. Can also be used as a hole punch and nibbler when used with optional punch tooling sold separately. Features a reversible 3/8 inch ram with a 3/16 inch counterbore on one end to accept interchangeable tooling. Package includes completely assembled press with 3/32 inch press tip, die bore plug, ram thumbscrew, adjustable nylon gib and instructions. Constructed of steel and aluminum alloy. Base is 7 inches x 3 inches. Throat depth is 4-1/4 inches. High quality; made in Asia.
|83708||9-PC. TOOLING SET FOR PRESS-IT PRECISION ARBOR /PUNCH PRESS
9-piece Tooling Set for Press-It includes 1/16 inch tip; bored cone for pointed axles; 3/16 inch blank; oversize 1/2 inch O.D. tip; center punch tip; and 1.5mm, 2mm, 3/32 inch and 1/8 inch bored tips. High quality; made in Asia.
|83709||9-PC. HOLE PUNCH SET FOR PRESS-IT PRECISION ARBOR/PUNCH PRESS
9-piece Hole Punch Set for Press-It includes one punch and one die in each of the following inch sizes: 1/16, 5/64, 3/32, and 1/8, plus adapter needed to mount punch to bottom of ram. Note: Maximum thickness for all hole punching is .020 inch half-hard brass or equivalent. High quality; made in Asia.
The Finest, Most Versatile Vise You'll Ever Own.
Hold it anywhere you want it! This professional quality vise will undoubtedly be the most used and useful tool on your workbench. Panavise tilts, turns and rotates to any angle or position with one turn of the control knob. The vise head and base are pressure-cast aluminum alloy with steel and brass inserts. Jaws are 2-1/2 inches wide, replaceable satin finish nylon for increased grip and gentle strength. Jaw opens to 2-1/4 inches, closes to zero. The variable load control knob and exclusive split ball feature permits moving work to any position.
|21124||STEEL JAWS FOR PANAVISE
Optional steel jaws for use with your No. 21123 Panavise or No. 82419 Panavise Head.
|21125||NYLON JAWS FOR PANAVISE
Set of nylon jaws for use with No. 21123 Panavise or No. 82419 Panavise Head.
|21126||PANAVISE BENCH CLAMP MOUNT
Panavise Bench Clamp Mount lets you move your Panavise to different locations. Securely mounts to edge of workbench, table or counter up to 3-1/2 inches thick. Mounting screws included. Designed for use with No. 21123 Panavise, No. 82417 Panavise Wide Opening Head/Base Combo and No. 82418 Panavise Base only.
|21127||PANAVISE WIDE OPENING HEAD
opens a full 6 inches with jaw width of 1-3/4 inches. Satin black oxide finish greatly reduces glare. Reversible and replaceable neoprene jaw pads have molded ribs for firm, yet gentle holding power. Ideal for holding model railroad rolling stock, cameras and other delicate items. Designed for use with No. 21123 Panavise or No. 82418 Panavise Base only.
|21128||NEOPRENE JAW PADS FOR PANAVISE
Neoprene jaw pads designed for use with No. 82417 or No. 21127 Panavise Wide Opening Head.
|21134||TOOLMAKER'S VISE, 2-1/2 INCH CAPACITY
Holds Tight for Drill Press Work.
Machinists and toolmakers always lock their work in a vise. Our vise is cast and ground tool steel. Stands flat on base or side and has vertical and horizontal V grooves in one jaw face for holding round stock. A heavy-duty, well made tool for a lifetime of use. 2-1/2 inch wide x 1-1/2 inch deep jaws. 2-1/2 inch capacity. Weighs over 5 lbs.
|60282||MINI TOOLMAKER'S VISE, 1-1/4 INCH CAPACITY
Holds Tight for Drill Press Work.
Machinists and toolmakers always lock their work in a vise. Our vise is cast and ground tool steel. Stands flat on base or side and has vertical and horizontal V grooves in one jaw face for holding round stock. A heavy-duty, well made tool for a lifetime of use.
Weighs over 1-1/2 lbs. with 1-7/16 inch wide x 7/8 inch deep jaws. 1-1/4 inch capacity.
First, this is the most comfortable knife handle youíve ever used and the adjustable chuck will hold every hobbycraft blade made. Second, itís the finest pin vise weíve ever seen. The brass chuck and 4 collets will hold drill bits up to No. 41 (.096 inch). Closes to zero. Third, itís an indispensible hand vise for holding micro-size parts while filing, drilling, cutting and more. The knurled brass tensioning knob at the back end draws all items tightly into the chuck. Handle and vise head are molded nylon. All other components are solid brass. 1/2 inch x 5 inch handle. 1/2 inch vise capacity. A beautifully made tool.
Holds When You Can't.
Use to hold small objects tight while grinding, drilling, filing, hammering, sanding, shaping, etc. Jaws have vertical and horizontal V grooves for holding round objects. Jaws are 1 inch wide and open to 5/8 inch. 6 inch long overall. All steel with wood handle. Use a hand vise and save your fingers.
|80769||MINI VISE, 3/4 INCH CAPACITY
Holds Odd Shaped Parts Delicately, Yet Securely.
This mini vise is ideal for holding small, odd-shaped parts while drilling, filing, painting, carving, sanding, grinding, etc. Non-mar plastic pins mounted in holes on the top of vise jaws can be placed in 12 different locations to conform to the shape of your part. Or remove pins and use as a conventional vise. Hold vise in your hand or place on drill press table for drilling. Smooth faced aluminum jaws are 1-3/4 inches wide x 1/2 inch deep and open to 3/4 inch. Features steel guide pins and knurled tightening screw.
|80848||GENTLE JAWS, 3 INCH x 1-1/4 INCH (SET OF 2)
No-Mar Gentle Jaws Protect Parts.
When you need to hold soft or delicate items in a vise, these attachments prevent damage caused by the steel jaws. Firm rubber faces hold parts securely, yet gently. Magnets on the back side keep the jaws in place on steel or cast iron vises. 3 inches wide x 1-1/4 inches deep.
|81314||ALL-POSITION VISE, 2 INCH CAPACITY
A Good Quality All-Position Vise for Less Money.
The head of our All-Position Vise rotates 360 degrees and also tilts from 0 to 90 degrees, letting you position your work at the most accessible angle. All movements are locked by a single lever. The vise clamps to the edge of your workbench (up to 2-1/8 inches thick) for portability. Made of die-cast aluminum and nickel-plated steel. Jaws are 3 inches wide, open to 2 inches and feature slide-off rubber pads. Overall height above workbench is 6-1/4 inches (in vertical position). A great value compared to other all-position vises.
|81495||MICRO-VISE FOR ROUND OBJECTS, 1/2 - 1-1/2 INCH DIA. CAPACITY
Perfect for holding small round items while drilling, filing, grinding or performing other operations. Four double-sided surfaces provide 8 gripping edges specially formed to hold diameters from 1/2 inch to 1-1/2 inches. The knurled thumbscrew applies just the right amount of gripping force necessary to hold objects securely without damaging them. Made of plated brass.
|81682||MICRO HAND VISE
Unique Micro Hand Vise allows wire or small diameter tubing to pass straight through the hollow handle and tightening screw. Jaws hold securely while you form, fit, finish, clean, etc. Holds wire up to .050 inch diameter and other objects up to 3/32 inch thick. Jaws are 3/8 inch wide. Overall length: 5 inches. Made of blackened steel.
|82417||PANAVISE WIDE OPENING HEAD / BASE COMBO
Hold it anywhere you want it! This professional quality vise will undoubtedly be the most used and useful tool on your workbench. Panavise tilts, turns and rotates to any angle or position with one turn of the control knob. The vise base is pressure-cast aluminum alloy with steel and brass inserts. Variable load control knob and exclusive split ball feature permits moving work to any position. The Panavise Wide Opening Head opens a full 6 inches with a jaw width of 1-3/4 inches. Satin black oxide finish greatly reduces glare. Reversible and replaceable neoprene jaw pads have molded ribs for firm, yet gentle holding power. Ideal for holding model railroad rolling stock, cameras and other delicate items.
Hold it anywhere you want it! Panavise tilts, turns and rotates to any angle or position with one turn of the control knob. The Panavise Base is pressure-cast aluminum alloy with steel and brass inserts. Variable load control knob and exclusive split ball feature permit moving work to any position.
|82546||QUICK-JAW VISE, 2-1/4 INCH CAPACITY
The slots in our Quick-Jaw Vise and the mounting screws we provide let you position your work in almost any location. The spring action spindle latch holds work tightly or releases in an instant. Made of steel and cast aluminum. Jaws are 2-3/4 inches wide x 1 inch deep. One jaw has a horizontal V groove to hold round stock. 2-1/4 inch capacity; closes to 0. Fits many brands of drill presses, including Dremel drill presses and workstations.
|83383||TWO WAY MILLING MACHINE VISE
Mounts to milling machine or drill press table. Rotates 360 degrees and inclines from 0 to 90 degrees to mill or drill at any angle in-between. 2 inch wide x 1 inch deep jaws open 1-7/8 inches. Height at 0 incline is 3-5/8 inches. Includes engraved markings for degrees of incline and rotation.
|83441||BRASS MINI VISE, 1-1/2 INCH CAPACITY
For Precision Work on Small Parts.
Miniature jeweler's vise holds small parts while working in the hand or on the workbench. Brass jaws are held in perfect alignment by metal guide pins, and the fine-pitch adjustment knob lets you dial in just the force you need to grip parts securely. Grooves in the jaw face hold round items in both horizontal and vertical positions. Jaws are 1-1/2 inches wide; open to 1-1/2 inches. Closes to zero.
|84259||VERTICAL BENCH VISE
Special Vise Attaches to Vertical Surfaces.
We like to mount this vise to the vertical front surface of our workbench. It lets us file, saw, carve and sand over a trash bin to catch shavings, and work at a lower, more comfortable height than our workbench allows. Spring-loaded 1-1/4 inch wide jaws open 1/2 inch and include plastic no-mar inserts with grooves that hold bar stock, strip and tubing securely.
|84734||MINI METAL SHEAR / BRAKE
Combination Shear and Bending Brake for Precision Sheet Metal and Circuit Board Fabrication. This double-featured miniature machine will save you hours of tedious sheet metal fabrication and finishing. The upper section is equipped with a sharp 7-1/2 inch wide shear that smoothly cuts plastic and circuit board stock up to 1/16 inch thick; soft copper, brass, aluminum and tinplate sheet up to .031 inch thick. The lower section is a powerful bending brake that bends sheet metal up to 90 degrees and 7-1/2 inches wide. The integral gearbox triples the torque you apply to the hand lever so less force is needed to get the job done. Includes six bending dies of various widths for tray and pan forming operations, and adjustable stops for making duplicate parts. Shear blade has four pre-sharpened edges for long life. Overall dimensions: 11 inches wide x 6 inches deep x 13 inches high over handle. Approx. weight 30 lbs. (Color may vary.)
Please note price and availability are subject to change.