Home Product Lists Order Form Contact Us Links Show Schedule
"Serious stuff for the model railroad buff"
Soldering and Electrical
| 17107 | SOLDERING IRON / HOT KNIFE Soldering Iron Doubles as Hot Knife Cutting Tool Compact, lightweight, 30 watt soldering iron with steel barrel and heat resistant handle develops up to 720 degrees F. Pencil-point tip gets into the tightest places. Handle stays cool while you work. Hot knife attachment cuts and welds styrene and other plastics easily. |
 |
$18.00 |
| 17110 | TIX SOLDER The Hardest Soft Solder on Earth Easy flowing Tix Solder melts at only 275 degrees F and yet has the holding power of 4,300 pounds per square inch. Adheres to all solderable metals and works with soldering iron, gun or torch. Will not tarnish. The jeweler's choice for years. Package of twenty 3 inch long sticks. |
 |
$16.75 |
| 17111 | TIX SOLDERING FLUX Tix Flux cleans and prepares metal for best solder adhesion. Works with any soft solder. Washes off with water. 1/2 oz. |
 |
$4.00 |
| 17112 | TIX ANTI-FLUX, 1/2 OZ. Tix Anti-Flux prevents solder from flowing to unwanted areas. Brushes on easily. 1/2 oz. |
 |
$4.00 |
| 70219 | SOLDERING PAD (6 INCHES x 6 INCHES) |
 |
$17.75 |
| 70220 | SOLDERING PAD, 12 INCH x 12 INCH Soldering Pad Makes Soldering Small Parts Easy Until now, soldering small components could be a real problem. If you soldered 2 parts together and then tried to add a third or fourth part, the first joint would come apart. Our soldering pad solves this problem. Just place all components on the pad and hold together with T pins. Then heat each joint and apply solder. The ceramic fiber pad withstands temperatures up to 2,800 degrees F and is soft enough to accept our T pins easily. 1/2 inch thick. 12 inches x 12 inches. |
 |
$39.00 |
| 80822 | STAY BRITE SILVER SOLDER AND FLUX, 1/2 OZ. EACH Stay Brite is the premium solder that solders all metals except aluminum (including stainless steel and cast iron). It flows freely and has over twice the tensile strength of regular solder. Melts and flows at only 430 degrees F, providing strength without distortion. Includes a 1/2 oz. coil of solder and 1/2 oz. bottle of flux. Can be used with soldering iron or torch. Lead free. |
 |
$18.50 |
| 81014 | v Weller's Variable Temperature Electronic Soldering Station gives you a higher level of performance than you can get with a standard gun or iron, but without the cost of an industrial type soldering tool. Features variable power control from 5 to 40 watts (up to 900 degrees F), allowing one tool to do the work of several. You can solder fine electronic wires or brass rod with the same tool. Includes iron with cushioned foam grip and No. 81017 standard tip, on/off switch with power-on light, safety guard iron holder and sponge pad for tip cleaning. |
 |
$55.00 |
| 81015 | 1/32 INCH MICRO SOLDERING TIP Designed for use with No. 81014 Soldering Station. |
 |
$7.25 |
| 81016 | 1/16 INCH MINI SOLDERING TIP Designed for use with No. 81014 Soldering Station. |
|
$7.25 |
| 81017 | 1/8 INCH MICRO SOLDERING TIP Designed for use with No. 81014 Soldering Station. |
|
$7.25 |
| 83473 | ROSIN FLUX PEN, 10ML The Professionals' Choice for Flux Application Pen-style chisel tip applies flux only where you want it...avoids the drips and smears that ruin the surface finish of brass models, printed circuit boards, fine jewelry and other delicate items. Contains 10ml of non-corrosive RA type flux. |
 |
$9.50 |
| 83516 | THERMA BOOST HEAT TOOL Get an Extra Burst of Power When You Need It Here's a combination soldering iron/hot knife with a difference. The Weller Therma-Boost Heat Tool normally operates at 30 watts, which is ample for standard use. But, when the going gets tough, just pull the trigger and the power will be boosted to 130 watts. Red and green lights on the rear of the comfortable pistol grip indicate standard and boost modes. Use for soldering, rope cutting, foam cutting, shaping, smoothing and scoring. Heats to working temperature in less than 1 minute. Weighs just 3 ounces. Includes stand and 6 tips. |
 |
$30.00 |
| HS-1/16-B | BLACK 1/16 INCH X 6 INCH This irradiated flexible POLYOLEFIN general purpose heat-shrinkable tubing is used for insulating, jacketing, bundling and identification. It is mechanically tough, will not cold flow, never melts and will not split when shrunk over sharp or irregularly shaped objects. Temperature Range: 67F to 275F. Shrink Ratio: 2 to 1 (50%). Shrink Temperature: 121C /2500F. Available in Black or Clear. Packaged in 6" lengths. 10 pcs |
 |
$3.50 |
| HS-1/8-B | BLACK 1/8 INCH X 6 INCH This irradiated flexible POLYOLEFIN general purpose heat-shrinkable tubing is used for insulating, jacketing, bundling and identification. It is mechanically tough, will not cold flow, never melts and will not split when shrunk over sharp or irregularly shaped objects. Temperature Range: 67F to 275F. Shrink Ratio: 2 to 1 (50%). Shrink Temperature: 121C /2500F. Available in Black or Clear. Packaged in 6" lengths. 10pcs |
|
$3.00 |
| 10-140 | BLACK TERMINAL STRIP, 6 AMP, 10 CONTACT |
 |
$5.50 |
| 10-140J1 | JUMPER FOR 140 TYPE 2 CONTACT TERMINAL STRIP - 2 pieces |
 |
$1.00 |
| 10-140J2 | JUMPER FOR 140 TYPE 10 CONTACT TERMINAL STRIP |
|
$3.00 |
| W12-1 | WHITE TERMINAL STRIP, 6 AMP, 12 CONTACT |
 |
$4.00 |
| W12-10 | WHITE TERMINAL STRIP, 6 AMP, 12 CONTACT 10 PACK |
|
$35.00 |
| TB-6 | WHITE TERMINAL STRIP, 6 AMP, 10 CONTACT |
|
$3.00 |
For your convenience, we accept VISA and MasterCard.
Please note price and availability are subject to change.