Home Product Lists Order Form Contact Us Links Show Schedule
"Serious stuff for the model railroad buff"
Power Tool Accessories
Accessories for Drills | |||
| 14260 | UNIVERSAL FLEX SHAFT Turns Any Rotary Tool, Drill Press or Power Drill into a Flexible Shaft Machine. Our Universal Flex Shaft lets you use your older model rotary tool, hand drill or drill press as a flexible shaft machine (for Dremel models 275, 285, 300, 395, 595, 398, 7800 and FreeWheeler, order our item No.50352 Flexible Shaft). Light, slim, pen-size hand piece gets you into the tightest spots. Accepts all rotary accessories and drill bits from 1/32 inch to 1/8 inch. Drive end attaches to any 3/32 inch collet (our item No.38251, sold separately) or drill chuck. Includes 4 collets and angle wrench. Bronze bearings let you work at speeds up to 20,000 rpm. 31 inches long. Note: When using flex shafts with rotary tools, we recommend you use No.84706 Flex Shaft Stand. |
 |
$18.25 |
| 82281 | CENTER FINDER FOR ROUND STOCK Special Indicator Locates Drill Chucks Exactly on Center. Never drill off-center holes again...use our Center Finder to quickly and easily position your drill press chuck directly above the exact center of a round workpiece. Indicator amplifies the slightest misalignment so you can adjust before drilling. 3/8 inch shank fits larger drill presses. |
 |
$13.00 |
| 83411 | 8 INCH DIGITAL READOUT FOR MACHINE TOOLS Saves Time, Improves Accuracy. Digital readout installs on your lathe, milling machine or other machine tool to display the exact location of the carriage, spindle or milling table. The large, easy-to-see Liquid Crystal Display reads directly in inches or millimeters up to 8 inches. Eliminates the counting of dial turns and errors due to lead-screw backlash. Re-zeroes at any location. Includes on/off, zero and inch/mm buttons, plus battery and instructions. Resolution .0005 inch. Note: Due to the wide range of applications for this device, installation is left up to the purchaser. |
 |
$50.00 |
| 84364 | STEP CLAMP SET FOR X-Y TABLE Beautifully cast and plated step blocks and clamp bars adjust to the height you need to clamp workpieces to the No.82389 X-Y table attachment (sold separately). Blocks are 1 inch x 5/8 inch x 5/8 inch thick. Bars are 1-9/16 inch long x 5/8 inch wide x 5/16 inch thick. Includes 2 each: step blocks, clamp bars, studs, washers and nuts. Packed in a compartmented, varnished wood storage box. |
 |
$28.50 |
| 84519 | MINIATURE DIGITAL LEVEL 2-in-1 High-Precision Miniature Digital Level. • Measures Exact Angles of Machine-Tool Set Ups • Measures Grades with Ultra Precision. Carpenter levels are just too large and inaccurate for machine set-up, and too clumsy for measuring model railroad track grades and superelevation. So, we encased our high precision digital level in a compact housing that's only 2 inches square by 1 inch deep. At the press of a button, the large LCD reads the relative angle between machine surfaces or the percent grade from sea level. Embedded magnets attach it securely to cast-iron/steel surfaces for hands-free measurement. Range: 0 to 45 degrees/100%. Readability: 0.05 degress/0.01%. Hold button remembers last reading. Housing made from durable CNC-machined, satin-finish alloy. Includes battery and auto shut-off battery saver. |
 |
$35.00 |
Brushes and Buffers | |||
| 15114 | BRASS BRUSH, 7/8 INCH DIA. Brass brush won't scratch soft metals. Brush shanks vary...1/8 inch or 3/32 inch. |
 |
$3.50 |
| 38207 | WIRE WHEEL BRUSH Small, versatile steel brush used for efficiently removing rust and corrosion, and for polishing metal surfaces. Brush shanks vary...1/8 inch or 3/32 inch. |
 |
$3.50 |
| 38208 | WIRE CUP BRUSH Small, versatile steel brush used for efficiently removing rust and corrosion, and for polishing metal surfaces. Brush shanks vary...1/8 inch or 3/32 inch. |
 |
$3.50 |
| 38209 | WIRE END BRUSH Small versatile steel brush used for efficiently removing rust and corrosion, and for polishing metal surfaces. Brush shanks vary...1/8 inch or 3/32 inch. |
 |
$3.50 |
| 38210 | BRISTLE WHEEL BRUSH For cleaning and polishing silverware, jewelry and metal surfaces. Ideal for hard-to-reach places. Brush shanks vary...1/8 inch or 3/32 inch. |
 |
$3.50 |
| 38211 | BRISTLE CUP BRUSH For cleaning and polishing silverware, jewelry and metal surfaces. Ideal for hard-to-reach places. Brush shanks vary...1/8 inch or 3/32 inch. |
 |
$3.50 |
| 38212 | BRISTLE END BRUSH For cleaning and polishing silverware, jewelry and metal surfaces. Ideal for hard-to-reach places. Brush shanks vary...1/8 inch or 3/32 inch. |
 |
$3.50 |
| 60736 | WOVEN ABRASIVE REPLACEMENT WHEEL 3 inch dia. woven abrasive wheel designed for use with No.60730 Miniature Grinder. 3/4 inch wide, 10mm hole. |
 |
$8.25 |
| 81848 | MINI TEXTURE WHEELS (SET OF 2) Put a Satin Finish on Metal. Texture wheels are great for putting satin finishes on brass, steel and aluminum surfaces. Will safely clean and remove tarnish from R/C plane and car engines, model railroad wheel treads, ship parts, etc. Also use to prepare surfaces for soldering. Wheels are 7/8 inch dia. x 1/4 inch thick with 3/32 inch dia. shafts. Set includes one hard and one soft texture wheel. |
 |
$13.25 |
Burrs and Cutters | |||
| 14450 | TUNGSTEN CARBIDE CUTTER, COARSE (1/2 INCH x1/2 INCH, CONE SHAPE, 1/8 INCH SHANK) Tungsten Carbide Cutters Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. |
 |
$9.00 |
| 14451 | TUNGSTEN CARBIDE CUTTER, FINE (1/2 INCH x1/2 INCH, CONE SHAPE, 1/8 INCH SHANK) Tungsten Carbide Cutters Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. |
 |
$9.00 |
| 14452 | TUNGSTEN CARBIDE CUTTER, COARSE (5/16 INCH DIA., ROUND, 1/8 INCH SHANK) Tungsten Carbide Cutters Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. |
 |
$9.00 |
| 14453 | TUNGSTEN CARBIDE CUTTER, FINE (5/16 INCH DIA., ROUND, 1/8 INCH SHANK) Tungsten Carbide Cutters Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. |
 |
$9.00 |
| 14454 | TUNGSTEN CARBIDE CUTTER, COARSE (1/2 INCH DIA., ROUND, 1/8 INCH SHANK) Tungsten Carbide Cutters Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. |
 |
$9.00 |
| 14455 | TUNGSTEN CARBIDE CUTTER, FINE (1/2 INCH DIA., ROUND, 1/8 INCH SHANK) Tungsten Carbide Cutters Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. |
 |
$9.00 |
| 14456 | TUNGSTEN CARBIDE CUTTER, COARSE (5/8 INCH DIA., DISK SHAPE, 1/8 INCH SHANK) Tungsten Carbide Cutters Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. |
 |
$9.00 |
| 14457 | TUNGSTEN CARBIDE CUTTER, FINE (5/8 INCH DIA., DISK SHAPE, 1/8 INCH SHANK) Tungsten Carbide Cutters Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. |
 |
$9.00 |
| 14458 | TUNGSTEN CARBIDE CUTTER, COARSE(1/4 INCH x 1/2 INCH, CYLINDER SHAPE,1/8 INCH SHANK) Tungsten Carbide Cutters Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. |
 |
$9.00 |
| 14459 | TUNGSTEN CARBIDE CUTTER, FINE (1/4 INCH x 1/2 INCH, CYLINDER SHAPE, 1/8 INCH SHANK) Tungsten Carbide Cutters Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. |
 |
$9.00 |
| 14460 | TUNGSTEN CARBIDE CUTTER, COARSE (1/8 INCH x 3/4 INCH, 1/8 INCH SHANK) Tungsten Carbide Cutters Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. |
 |
$9.00 |
| 14461 | TUNGSTEN CARBIDE CUTTER, FINE (1/8 INCH x 3/4 INCH, 1/8 INCH SHANK) Tungsten Carbide Cutters Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. |
 |
$9.00 |
| 38185 | SOLID CARBIDE CUTTER (1/8 INCH DIA., 1/8 INCH SHANK) Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel. |
 |
$13.00 |
| 38193 | SOLID CARBIDE CUTTER (1/8 INCH DIA., 1/8 INCH SHANK) Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel. |
 |
$13.00 |
| 60474 | MICRO CUTTERS, 1/32 INCH DIA. HEAD (3/32 INCH SHANK, SET OF 4) These high speed, small engraving cutters are ideal for power engraving intricate details in wood, fiber, plastic and soft metals. 3/32 inch shanks fit Dremel and Micro-Mark high speed grinders and our power engraving tool. Set of 4. |
 |
$8.50 |
| 60475 | MICRO CUTTERS, 3/64 INCH DIA. HEAD (3/32 INCH SHANK, SET OF 4) These high speed, small engraving cutters are ideal for power engraving intricate details in wood, fiber, plastic and soft metals. 3/32 inch shanks fit Dremel and Micro-Mark high speed grinders and our power engraving tool. Set of 4. |
 |
$8.50 |
| 60476 | MICRO CUTTERS, 1/16 INCH DIA. HEAD (3/32 INCH SHANK, SET OF 4) These high speed, small engraving cutters are ideal for power engraving intricate details in wood, fiber, plastic and soft metals. 3/32 inch shanks fit Dremel and Micro-Mark high speed grinders and our power engraving tool. Set of 4. |
 |
$8.50 |
| 60671 | SOLID CARBIDE CUTTER (1/4 INCH DIA., 1/8 INCH SHANK) Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel. |
 |
$12.75 |
| 60672 | SOLID CARBIDE CUTTER (1/4 INCH DIA., 1/8 INCH SHANK) Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel. |
 |
$12.75 |
| 60674 | SOLID CARBIDE CUTTER (1/4 INCH DIA., 1/8 INCH SHANK) Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel. |
 |
$12.75 |
| 60676 | SOLID CARBIDE CUTTER (1/4 INCH DIA., 1/8 INCH SHANK) Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel. |
 |
$12.75 |
| 60677 | SOLID CARBIDE CUTTER (1/4 INCH DIA., 1/8 INCH SHANK) Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel. |
 |
$12.75 |
| 60679 | SOLID CARBIDE CUTTER (1/16 INCH DIA., 1/8 INCH SHANK) Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel. |
 |
$12.75 |
| 60919 | 6-PIECE TUNGSTEN CARBIDE CUTTER SET, FINE Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. 6-piece Set includes 1 each of the following Fine Grit Tungsten Carbide Cutters: No.14451, 1/2 inch x 1/2 inch; No.14453, 1/2 inch x 1/2 inch; No.14455, 5/16 inch dia.; No.14457, 5/8 inch dia.; No.14459, 1/4 inch x 1/2 inch; No.14461, 1/8 inch x 3/4 inch |
 |
$51.50 |
| 60920 | 6-PIECE TUNGSTEN CARBIDE CUTTER SET, COARSE Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. 6-piece Set includes 1 each of the following Coarse Grit Tungsten Carbide Cutters: No.14450, 1/2 inch x 1/2 inch; No.14452, 1/2 inch x 1/2 inch; No.14454, 5/16 inch dia.; No.14456, 5/8 inch dia.; No.14458, 1/4 inch x 1/2 inch; No.14460, 1/8 inch x 3/4 inch |
 |
$51.50 |
| 80919 | 20-PIECE DIAMOND COATED MICRO BURR SET (1/8 INCH SHANK) Smooth and Shape Almost Anything. Burrs coated with real industrial diamonds let you grind, engrave, smooth and shape wood, plastic, metal...even hardened steel and glass. They're also used for sharpening steel and carbide tipped cutting tools. Shanks are 1/8 inch so they'll fit Dremel and other high speed rotary tools. Includes a plastic storage case. Standard Micro Burr Set includes 20 different shapes with cutting diameters up to 1/8 inch. |
 |
$10.00 |
| 81094 | 8-PIECE JUMBO DIAMOND COATED MICRO BURR SET Smooth and Shape Almost Anything. Burrs coated with real industrial diamonds let you grind, engrave, smooth and shape wood, plastic, metal...even hardened steel and glass. They're also used for sharpening steel and carbide tipped cutting tools. Shanks are 1/8 inch so they'll fit Dremel and other high speed rotary tools. Jumbo Diamond Coated Micro Burr Set includes 8 different shapes with cutting diameters up to 1/4 inch, plus plastic storage case. |
 |
$10.00 |
| 81418 | DIAMOND CORE DRILL, 3/8 INCH DIA. (1/8 INCH SHANK) For Hard-to-Drill Materials. Diamond Core Drills are the best tools for drilling smooth, clean holes in glass, ceramics, stone, fiberglass and other hard materials. 1/8 inch shank fits all rotary tools. |
 |
$6.75 |
| 81419 | DIAMOND CORE DRILL, 1/4 INCH DIA. (1/8 INCH SHANK) For Hard-to-Drill Materials. Diamond Core Drills are the best tools for drilling smooth, clean holes in glass, ceramics, stone, fiberglass and other hard materials. 1/8 inch shank fits all rotary tools. |
 |
$6.75 |
| 81957 | TYPHOON BURR, COARSE (1/4 INCH DIA. x 1/2 INCH, 1/8 INCH SHANK) Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks. |
 |
$17.00 |
| 81958 | TYPHOON BURR, FINE (1/4 INCH DIA. x 1/2 INCH, 1/8 INCH SHANK) Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks. |
 |
$17.00 |
| 81959 | TYPHOON BURR, COARSE (1/8 INCH DIA. x 3/4 INCH, 1/8 INCH SHANK) Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks. |
 |
$17.00 |
| 81960 | TYPHOON BURR, FINE (1/8 INCH DIA. x 3/4 INCH, 1/8 INCH SHANK) Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks. |
 |
$17.00 |
| 81961 | TYPHOON BURR, COARSE (1/4 INCH DIA. x 1/2 INCH, 1/8 INCH SHANK) Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks. |
 |
$17.00 |
| 81962 | TYPHOON BURR, FINE (1/4 INCH DIA. x 1/2 INCH, 1/8 INCH SHANK) Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks. |
 |
$17.00 |
| 81965 | TYPHOON BURR, COARSE (3/4 INCH DIA. x 1/8 INCH, 1/8 INCH SHANK) Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks. |
 |
$17.00 |
| 81966 | TYPHOON BURR, FINE (3/4 INCH DIA. x 1/8 INCH, 1/8 INCH SHANK) Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks. |
 |
$17.00 |
| 82260 | 30-PIECE DIAMOND COATED MICRO BURR SET Smooth and Shape Almost Anything. Burrs coated with real industrial diamonds let you grind, engrave, smooth and shape wood, plastic, metal...even hardened steel and glass. They're also used for sharpening steel and carbide tipped cutting tools. Shanks are 1/8 inch so they'll fit Dremel and other high speed rotary tools. Jumbo Diamond Coated Micro Burr Set includes 8 different shapes with cutting diameters up to 1/4 inch, plus plastic storage case. |
 |
$15.00 |
| 82657 | TYPHOON BURR, COARSE (1/2 INCH DIA. x 3/8 INCH; 1/8 INCH SHANK) Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks. |
 |
$17.00 |
| 82658 | TYPHOON BURR, FINE (1/2 INCH DIA. x 3/8 INCH; 1/8 INCH SHANK) Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks. |
 |
$17.00 |
Chucks and Collets | |||
| 15264 | UNIVERSAL 3-JAW CHUCK FOR ROTARY TOOLS, 1/64-1/8 INCH CAPACITY (1/8 INCH SHANK) Tired of changing collets on your rotary tool every time you change the bit? If you are, then you'll love our keyless 3-jaw chuck. Includes special adapter with 1/8 inch shank that fits into any rotary tool's 1/8 inch collet. Holds drill bits and all accessories from 1/64 inch to 1/8 inch. Recommended for speeds up to 10,000 rpm. |
 |
$18.00 |
| 38250 | 1/8 INCH COLLET FOR DREMEL ROTARY TOOLS For all Dremel rotary tool models. |
 |
$3.00 |
| 38251 | 3/32 INCH COLLET FOR DREMEL ROTARY TOOLS For all Dremel rotary tool models. |
 |
$3.00 |
| 38252 | 1/16 INCH COLLET FOR DREMEL ROTARY TOOLS For all Dremel rotary tool models. |
 |
$3.00 |
| 38253 | 1/32 INCH COLLET FOR DREMEL ROTARY TOOLS For all Dremel rotary tool models. |
 |
$3.00 |
| 81049 | SCREW-ON 3-JAW KEYLESS CHUCK FOR ROTARY TOOLS, 1/64-1/8 INCH CAPACITY 3-Jaw Keyless Chuck screws directly on threaded portion of motor shaft for fast replacement of bits and accessories with 1/64 inch to 1/8 inch shanks. |
 |
$14.25 |
| 81852 | MINI CHUCK FOR CORDLESS SCREWDRIVER (1/4 INCH HEX SHANK) Special Chuck Fits Cordless Screwdrivers for Slow Speed Drilling. Also works as an adapter for your oversized drill chuck, quickly converting it for precise drilling with micro size bits. Most drills and rotary tools spin too fast for working in plastic and for tiny detail work. Special chuck has 1/4 inch hex shank that fits your slow turning Dremel®, Black and Decker®, Craftsman®, or other cordless screwdriver to solve this problem. Take advantage of the quick-change feature of the 1/4 inch shank...buy several chucks and keep your most-used drill bits ready to go. Holds drill bits from 1/8 inch to No.59. |
 |
$10.50 |
| 82507 | TAILSTOCK CHUCK, MT-2 |
 |
$30.00 |
| 82512 | 3-JAW SELF-CENTERING CHUCK Body dia. = 3.150 inches. Internal jaws clamping range = .079 to .866 inch. Internal jaws jamming range = .984 to 2.756 inches. External jaws clamping range = .866 to 2.480 inches. Approx. 5/8 inch dia. thru-hole. |
 |
$70.00 |
| 82540 | MICRO DRILL CHUCK, No.61 - No.80 (1/8 INCH SHANK) Locks into the collet of any rotary tool. Will also work with hand drills and drill presses. Holds any small size drill bit from number 61 (.039 inch) to number 80 (.0135 inch). Closes to 0. Recommended for use up to 10,000 rpm only. |
 |
$6.50 |
| 82541 | PRECISION MICRO CHUCK FOR CORDLESS SCREWDRIVER, #60 - #80 CAPACITY (1/4 " HEX SHANK) |
 |
$9.75 |
| 82575 | COLLET SET FOR LATHE AND MILLING MACHINE Universal design Collet Set includes collet holder with MT3 shank and 'snap-in' style collet nut, plus 8 collets in sizes 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 9/16 and 5/8 inch. Includes drawbar for MicroLux Lathe (drawbar for milling machine comes with that machine). |
 |
$150.00 |
| 82645 | COLLET BLANK Make your own custom collet sizes with this non-hardened collet blank. |
 |
$13.75 |
| 82746 | TAILSTOCK CHUCK, MT1 (1/32 - 3/8 INCH DIA. CAPACITY) Tailstock Chuck with MT1 shank. Holds drills 1/32 inch to 3/8 inch diameter. |
 |
$24.25 |
| 82752 | HEADSTOCK CHUCK FOR MINI WOODTURNERS' LATHE, MT-1 (2 INCH CAPACITY) Chuck with MT1 shank installs in headstock of No.82565 Mini Wood Lathe and has reversible jaws to hold stock up to 2 inches in diameter. |
 |
$50.75 |
| 83164 | ROTATING TAILSTOCK CHUCK, MT2 (1/2 INCH CAPACITY) Live 3-Jaw Tailstock Chuck rotates on smooth, sealed bearing to support small diameter stock while turning in the lathe. Use when there is insufficient room for follower rest. Works great for truing armatures and flywheels mounted on small diameter motor shafts. MT2 shank fits a wide variety of machines. Includes chuck key. 1/2 inch capacity. |
 |
$46.00 |
| 83266 | SELF-CENTERING 3-JAW CHUCK Larger capacity self-centering 3-jaw chuck with 7/8 inch dia. bore allows full use of hole through MicroLux Lathe spindle. Body dia. = 3.937 inches. Internal jaws clamping range = .078 to 1.181 inches. Internal jaws jamming range = 1.181 to 3.543 inches. External jaws clamping range = 1.181 to 3.150 inches. |
 |
$96.00 |
| 83371 | SELF-CENTERING 4-JAW CHUCK 4-jaw self-centering chuck with 5/8 inch dia. bore. Body dia. = 3.150 inches. Internal jaws clamping range = .079 to .866 inch. Internal jaws jamming range = .984 to 2.756 inches. External jaws clamping range = .866 to 2.480 inches. Includes internal and external jaws and key. |
 |
$89.00 |
MicroLux Attachments and Accessories | |||
| 15117 | MICROLUX DRILL PRESS DRIVE BELT For use with No.81631 MicroLux Drill Press. |
 |
$7.00 |
| 15118 | DRILL PRESS VISE, 1-1/4 INCH CAPACITY Grooved base fits on MicroLux No.81631 Standard Duty Drill Press sliding gauge or mount with clamps to No.82389 X-Y Table. Made of cast aluminum with easy grip plastic knob and steel screw. Jaws are 2 inches wide with grooves for holding round stock. Also has a handy anvil top with a cast-in hole for supporting micro size parts while drilling. Jaws open to 1-1/4 inches. |
 |
$22.50 |
| 15237 | REPLACEMENT POWER PLANE CUTTER Replacement cutter fits No.15228 MicroLux Power Plane. |
 |
$22.25 |
| 15238 | 3-JAW KEYLESS CHUCK, 1/64 INCH - 1/8 INCH CAPACITY Use in place of collets for quicker change of bits. 1/64 to 1/8 inch capacity. Designed for use with #82376 MicroLux Right Angle Disk Sander/Drill and No.15230 MicroLux High Speed Drill/Grinder. |
 |
$11.00 |
| 15239 | MICROLUX 80 GRIT SANDING BELT Designed for use with No.15299 MicroLux Belt Sander. |
 |
$3.00 |
| 15240 | MICROLUX 120 GRIT SANDING BELT Designed for use with No.15229 MicroLux Belt Sander. |
 |
$3.00 |
| 15244 | FINE JIGSAW BLADES FOR MICROLUX SAWS (PKG. OF 10) Designed for use with No.15226 MicroLux Jigsaw/Scroll Saw and No.82088 MIcroLux Cross Saw. |
 |
$6.75 |
| 15247 | SANDPAPER FOR MICROLUX No.15225 ORBITAL SANDER (ASST. GRITS, 10 SHTS) 10 sheets peel-and-stick sandpaper in assorted grits for use with No.15225 MicroLux Orbital Sander. |
 |
$6.50 |
| 15248 | EXTRA SANDER PAD FOR MICROLUX No.15225 ORBITAL SANDER Sander pad snaps on/off. Lets you keep different grits mounted and ready to use. Designed for use with No.15225 MicroLux Orbital Sander. |
 |
$5.75 |
| 15252 | DIAMOND GRINDING BLADE For micro filing and grinding of almost any material. Designed for use with No.15226 MicroLux Jigsaw/Scroll Saw and No.82088 MicroLux Cross Saw. |
 |
$11.50 |
| 70224 | RIPPING GAUGE SET Trial and error cutting of narrow stripwood is time consuming and costly. Our Brass Ripping Gauges save you time and money. Just place the correct width gauge next to the blade and slide the rip fence up to it. Remove the gauge and you've got the exact spacing you need within .003 inch. Set includes: 1/16 inch, 3/32 inch, 1/8 inch, 5/32 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch and 1/2 inch width gauges. For other widths, use 2 or more gauges in combination. All gauges are approx. 4 inches long. |
 |
$13.00 |
| 80467 | ACCURISER II For the MicroLux Tilt Arbor Saw Gives You Close Tolerance, Super-Accurate Rip Cuts. Rip stock to precise tolerances with this vernier adjustable rip fence. Has a self-aligning T-square design with positive lock that holds it perfectly parallel to the blade. The sliding face of the fence adjusts in .005 inch increments so your cuts will be more accurate than you ever thought possible. Order yours today and experience the difference precise cuts can make to all your miniature projects. |
 |
$60.00 |
| 80468 | SLIDING TABLE FOR MICROLUX TILTING ARBOR TABLE SAW Sliding Table Makes Precise Crosscuts. Guides on the bottom of the table slide in the grooves of the saw. The wide fence gives your work more support for 90 degree cuts. The triangles we supply give you perfect 30 degree, 45 degree and 60 degree cuts without resetting the miter gauge each time you change the angle of cut. Recommended for cuts in material up to 1/2 inch thick. Table is 10 inches x 12 inches. Fence is 1-1/2 inch high. Note: Sliding Table is designed for use with No.80463 Tilting Arbor Table Saw only. Not for use with No.50304 Miniature Table Saw. |
 |
$24.00 |
| 80605 | TAPER JIG This beautifully machined Taper Jig is used whenever you need to make a wood or plastic part with an angle cut on its long dimension. Adjusts easily to any taper. Made of machined aluminum and steel with a nylon handle. 6 inches long. |
 |
$19.00 |
| 80793 | MICROLUX TABLE SAW DRIVE BELT (SIZE MXL FOR OLDER MODELS) Size MXL (1/4 inch wide) for older models. Please check old drive belt before ordering. |
 |
$9.50 |
| 80850 | MICROLUX TABLE SAW DRIVE BELT (SIZE XL FOR NEWEST MODELS) Size XL (3/8 inch wide) for our newest models. Please check old drive belt before ordering. |
 |
$9.50 |
| 80898 | FEATHERBOARD AND HIGH FENCE ATTACHMENT SET Make Your MicroLux Table Saw More Versatile. The support provided by a high fence allows you to make cuts that are safer, easier and more accurate. And you can mount jigs and attachments to a high fence that won't fit on a standard fence.Here's what you'll get: 2 inch high x 10 inch long extruded aluminum rip fence. This attachment mounts to your existing fence in seconds with 3 clamping screws. It supports stock vertically, allowing you to make dado, rabbet, tenon and other edge cuts. You can also use home made push sticks, hold downs and other cutting jigs that slide along or clamp to the top edge and face of the fence to provide safer, more accurate cuts. Vertical featherboard. Mounts to high fence with C clamp (included). Flexible fingers hold stock tight against saw table and help prevent kick-back. Made of laser cut hardwood and steel. Horizontal featherboard. Mounts in miter gauge slot with special expanding clamp. Flexible fingers hold stock tight against rip fence. Adjustable for different stock widths. Made of laser cut hardwood, aluminum and steel. |
 |
$39.75 |
| 80899 | REPLACEMENT HORIZONTAL FEATHERBOARD Laser cut wood fingers only. Holds stock tight against rip fence. Made of hardwood. |
 |
$7.75 |
| 80900 | REPLACEMENT VERTICAL FEATHERBOARD Laser cut wood fingers only. Mounts to high fence. Flexible fingers hold stock tight against saw table and help prevent kick-back. Made of hardwood. |
 |
$7.75 |
| 80996 | DADO / SLOT WASHERS For the Microlux Saw. Special washers mount behind the blade to cut perfect 1/16 inch, 3/32 inch, 1/8 inch and 3/16 inch wide dado slots without making tedious trial and error adjustments. For use with No.80464 80 Tooth Standard Blade only. |
 |
$17.00 |
| 81387 | EASY-MOUNT BENCH BRACKET FOR MICROLUX SAWS This specially formed steel bracket attaches to the bottom of your MIcroLux saw, providing a quick and simple way to mount it to a work table. Two screw-type clamps secure the bracket to table tops up to 2 inches thick. Foam pads protect the table top surface. Includes hardware and instructions for mounting saws No.80463, No.60514 and No.50304. |
 |
$26.50 |
| 82118 | BLANK BLADE PLATES FOR MICROLUX TABLE SAW (SET OF 2) Ideal for Cutting Thin Strips of Wood. The MicroLux Tilt Arbor Saw has a gap alongside the blade which permits the blade to be tilted. But this gap allows thin strips of wood to fall through the table. To eliminate the gap, install the blank plate and raise the blade to cut a new slot. Now thin strips of wood will stay above the table where they belong. Works on MicroLux Tilt Arbor Saws with 5-3/8 inch long blade plates only. |
 |
$10.00 |
| 82211 | COOLING SYSTEM FOR No.82203 VARIABLE SPEED BAND SAW A cooling system is required when cutting stone, tile, ceramics, gems, minerals, glass and other hard materials with your band saw and a diamond blade. Reservoir and adjustable valve dispense water directly on the cut to lubricate and cool the blade, preventing overheating and premature blade failure. Unlike other water bath machines, ours won't splash water all over you and your workbench. Includes reservoir, valve, tubing, gasket, 12 inch x 16 inch collection tray and hardware. |
 |
$40.00 |
| 82377 | PEEL-AND-STICK SANDING DISK SET, 2-3/8 INCH DIA. (3 GRITS, 2 EACH) 2 each of 60, 120 and 240 grit peel-and-stick sanding disks. 2-3/8 inches dia. Designed for use with No.82376 MIcroLux Right Angle Disk Sander/Drill. |
 |
$6.25 |
| 82378 | FLEXIBLE DISK MOUNTING WHEELS, 2-3/8 INCH DIA. (SET OF 3) Flexible disk mounting wheels for finishing curved surfaces (very useful on gourds). Lets you keep sanding disks of different grits mounted and ready to use. Set of 3. Designed for use with No.82376 MicroLux Right Angle Disk Sander/Drill. |
 |
$10.00 |
| 82389 | MICROLUX X-Y TABLE ATTACHMENT Increases Accuracy by 30 Times! The MicroLux X-Y Table Attachment increases the accuracy of hole locations to within .0005 inch of true position -- 30 times better than 'eyeball' center-punching! Table positioning is controlled in the X and Y directions by smooth-acting zero-adjustable handwheels. Adjustable gibs in dovetail guides maintain accuracy and eliminate side play even after many years of use, and special retractable covers keep the lead screws free of chips. Although designed specifically for both MicroLux Drill Presses, our table attachment can be easily mounted to other machines. Includes sliding front scale, hold-down clamps, mounting hardware and template, and hardware for mounting the No.15118 Vise (sold separately). Made of steel, aluminum and engineering polymers. Specifications (inches):Table Size: 8-1/4 L x 2-3/4 D Overall Size: 10-1/2 L x 7-1/2 D x 1-11/16 H Base Size: 3-3/4 x 5-1/2 X Direction Travel: 5-1/4 Y Direction Travel: 1-3/4 Dial Graduations: .001; .050 per revolution. |
 |
$100.00 |
| 82412 | FOOT OPERATED SPEED CONTROL, 1.2 AMPS MAX. For MicroLux Standard Duty Drill Press. Variable speed foot-operated rheostat for drill press lets you adjust motor speed to suit material and drill size. Includes accessory socket for light. Electrical rating: 120v AC, 1.2 amps max. |
 |
$20.00 |
| 82689 | ROCKER TOOL POST, 5/8 INCH CAPACITY Rocker Tool Post lets you adjust position of tool bit to exact center of workpiece without shimming. Compensates for worn or resharpened cutting tools. Double-sided to hold two bits. Indexes on compound rest. 5/8 inch capacity. |
 |
$28.75 |
| 82960 | EXTRA DRIVE BELT FOR No.82959 VARIABLE SPEED DRILL PRESS Designed for use with No.82959 MicroLux Heavy Duty Variable Speed Drill Press with Digital Depthfinder. |
 |
$7.00 |
| 82996 | DRIVE BELT FOR MICROLUX 8 x 12 WOOD LATHE Fits MicroLux No.82995 8 x 12 Wood Lathe. |
 |
$5.00 |
| 84051 | STRAIGHTEN IT Put a New Edge on Your Work. Recover unevenly cut wood or put a new edge on a part with our Straighten It table saw guide. Use the three thumb screws (included) to secure the workpiece to the extruded aluminum frame and run through your saw. The result is a perfectly straight edge from which to measure and make new parts. Holds material up to 3/4 inch thick. Note: Uses same fence as our No.80898 Featherboard and Fence Set. |
 |
$15.00 |
Rotary Tool Attachments and Accessories | |||
| 50357 | RIGHT ANGLE DRIVE FOR ROTARY TOOLS Right Angle Drive attaches in seconds to Dremel models 275, 285, 300, 395, 595, 398, 7800, 800, 400XPR and 4000. It will drill, cut, sand and grind in places you never could before. Has a tough ABS housing, hardened metal gears and lifetime lubricated ball bearings. |
 |
$40.00 |
| 83002 | DREMEL LITHIUM-ION CORDLESS 10.8v BATTERY PACK Extra 10.8v Lithium-Ion battery designed for use with No.83001 Dremel Lithium-Ion Cordless Rotary Tool. Keep an extra battery charged up for uninterrupted use of your rotary tool. |
 |
$45.00 |
| 83097 | 100-PIECE ROTARY TOOL ACCESSORY SET Our 100-piece Rotary Tool Accessory Set provides a wide range of tools for nearly every application: high speed cutters for carving, shaping and grooving soft metals, plastics and wood; cut-off wheels for trimming metal, wood and plastic, slotting screw heads and cutting off screws and rusted bolts; sanders for shaping and cleaning; brushes and buffing wheels for general cleaning and polishing; grinding wheels for sharpening, deburring, removing rust. Set includes an assortment of cutters, grinding stones, brushes, mandrels, sanding drums, cut-off wheels, reinforced abrasive disks, sanding bands, buffing tips and wheels and more, all contained in a finished wooden organizer/storage case. |
 |
$21.00 |
| 83198 | DREMEL MULTISAW FOR 4000 AND 400 XPR Compact and versatile, the Dremel MultiSaw is a jig saw, reciprocating saw and scroll saw all in one. It's excellent for cutting hard and soft woods, plastics, thin sheet metal, paneling and more. Fits Dremel 4000 and 400XPR. Uses standard U and T shank jig saw blades (includes 1 blade for wood). |
 |
$35.00 |
| 83400 | CARBIDE SHAPING WHEEL, COARSE (1-1/4 INCH DIA., 40-46 GRIT; 1/8 INCH SHANK MANDREL) Works Hard, Runs Cool, Stays Clean. Creates compound curves in wood, fiberglass, laminates, plastic, leather and styrofoam. Contoured 1-1/4 inch dia. perforated steel wheel stays cool and doesn't clog up. Carbide grit is fast cutting and long lasting. Coarse (40 - 46) grit. Includes mandrel with 1/8 inch dia. shank. |
 |
$21.00 |
| 83401 | CARBIDE SHAPING WHEEL, FINE (1-1/4 INCH DIA., 120 GRIT; 1/8 INCH SHANK MANDREL) Works Hard, Runs Cool, Stays Clean. Creates compound curves in wood, fiberglass, laminates, plastic, leather and styrofoam. Contoured 1-1/4 inch dia. perforated steel wheel stays cool and doesn't clog up. Carbide grit is fast cutting and long lasting. Coarse (40 - 46) grit. Includes mandrel with 1/8 inch dia. shank. |
 |
$21.00 |
| 83403 | CARBIDE CUTTING / SHAPING WHEEL (60 GRIT; 1/8 INCH SHANK MANDREL) Works Hard, Runs Cool, Stays Clean. Flat disk Carbide Cutting/Shaping Wheel has 60 grit abrasive on both its outer edge and on its flat face, making it ideal for both fast cutting and shaping. Includes mandrel with 1/8 inch dia. shank. |
 |
$21.00 |
| 83404 | CARBIDE CUTTING WHEEL (60 GRIT; 1/8 INCH SHANK MANDREL) Works Hard, Runs Cool, Stays Clean. Flat disk Carbide Cutting Wheel has 60 grit abrasive on the outer edge only, allowing it to slice through materials quickly and cleanly. Includes mandrel with 1/8 inch dia. shank. |
 |
$16.00 |
| 83453 | DREMEL WORKSTATION combines the operation of a drill press, rotary tool holder and flex shaft machine in one space-saving attachment. Headstock rotates to perform angle drilling, and holds rotary tool at convenient angle for sanding and shaping. 6 inch square metal work surface, 4 inch throat, 6 inch clearance under collet, slotted table for guides and hold-downs. Telescoping column extends to 29 inches high for flex shaft use. Includes calibrated depth stop, storage system for accessories and FlexLite attachment fitting. Holds Dremel rotary tool models 275, 285, 395, 398, 595, 780, 800, 300 series, plus 400XPR and 4000. Note: Dremel Rotary Tool, No.82546 Quick-Jaw Vise, No.83238 Dremel FlexLite and No.83239 Workstation Drill Bit Set are shown attached, but are not included. |
 |
$50.00 |
| 84285 | ROTARY TOOL BIT HOLDER A New Spin on Rotary Tool Bit Holders. Our rotary bit holder has 114 holes that neatly store your tool bits in full view for easy identification. Ball-bearing base lets you quickly spin to the tool bit you need...saves time and aggravation. Large center well (2-3/4 inch diameter x 3 inches deep) holds glue bottles, brushes, files, pliers and more. Keeps your workbench well-organized with little effort. Overall size: 7 inches dia. x 4 inches high; holes are 1/8 inch diameter. |
 |
$15.00 |
Routers | |||
| 38224 | STRAIGHT ROUTER BIT, 1/8 INCH (1/8 INCH SHANK) For routing, inlaying, mortising in wood and other soft materials. 1/8 inch shank. |
 |
$9.50 |
| 38225 | STRAIGHT ROUTER BIT, 3/16 INCH (1/8 INCH SHANK) For routing, inlaying, mortising in wood and other soft materials. 1/8 inch shank. |
 |
$9.50 |
| 38226 | STRAIGHT ROUTER BIT, 1/4 INCH (1/8 INCH SHANK) For routing, inlaying, mortising in wood and other soft materials. 1/8 inch shank. |
 |
$9.50 |
| 38227 | VEINING ROUTER BIT, 1/4 INCH (1/8 INCH SHANK) For routing, inlaying, mortising in wood and other soft materials. 1/8 inch shank. |
 |
$9.50 |
| 38228 | VEINING ROUTER BIT (ROUND), 1/4 INCH (1/8 INCH SHANK) For routing, inlaying, mortising in wood and other soft materials. 1/8 inch shank. |
 |
$9.50 |
| 38229 | V-GROOVE ROUTER BIT, 1/4 INCH (1/8 INCH SHANK) For routing, inlaying, mortising in wood and other soft materials. 1/8 inch shank. |
 |
$9.50 |
| 38265 | 6-PIECE STANDARD ROUTER BIT SET For routing, inlaying, mortising in wood and other soft materials. 1/8 inch shank. No.38265 6-Piece Router Bit Set includes one each of the following: No.38224 1/8 Inch Straight Bit; No.38225 3/16 Inch Straight Bit; No.38226 1/4 Inch Straight Bit; No.38227 1/4 Inch Veining Bit; No.38228 1/4 Inch Veining Bit (round); No.38229 1/4 Inch V-Groove Bit |
 |
$52.50 |
| 60485 | DREMEL SHAPER TABLE ATTACHMENT Dremel Shaper Table Attachment lets you make miniature molding, grooves, slots and decorative edges with your Dremel rotary tool. Injection molded with router bit guard, adjustable guide fence and depth-of-cut setting. Fits all Dremel rotary tools except Mini-Mite, MultiPro 7700, model 260 and Stylus. |
 |
$37.00 |
| 60717 | 1/16 INCH ROUTER, DRILL POINT (1/8 INCH SHANK) This unique tool lets you cut any shape in wood, plastic, glass, ceramic, aluminum, brass, fiberglass and almost any material except hard steel. Use for enlarging and shaping holes, scroll cutting, smoothing. Cuts its own starting hole and any shape in any direction tool is moved. 1/8 inch shank fits in any rotary tool. Made of solid carbide for 30 times longer life than steel. 1/16 inch cutting diameter. |
 |
$12.25 |
| 60718 | 3/32 INCH ROUTER, DRILL POINT (1/8 INCH SHANK) This unique tool lets you cut any shape in wood, plastic, glass, ceramic, aluminum, brass, fiberglass and almost any material except hard steel. Use for enlarging and shaping holes, scroll cutting, smoothing. Cuts its own starting hole and any shape in any direction tool is moved. 1/8 inch shank fits in any rotary tool. Made of solid carbide for 30 times longer life than steel. 3/32 inch cutting diameter. |
 |
$12.25 |
| 60719 | 1/8 INCH ROUTER, DRILL POINT (1/8 INCH SHANK) This unique tool lets you cut any shape in wood, plastic, glass, ceramic, aluminum, brass, fiberglass and almost any material except hard steel. Use for enlarging and shaping holes, scroll cutting, smoothing. Cuts its own starting hole and any shape in any direction tool is moved. 1/8 inch shank fits in any rotary tool. Made of solid carbide for 30 times longer life than steel. 1/8 inch cutting diameter. |
 |
$12.25 |
| 60795 | 3-PIECE CARBIDE ROUTER DRILL SET (1/16 INCH DIA., 3/32 INCH DIA., 1/8 INCH DIA.) These unique tools let you cut any shape in wood, plastic, glass, ceramic, aluminum, brass, fiberglass and almost any material except hard steel. Use for enlarging and shaping holes, scroll cutting, smoothing. Cuts its own starting hole and any shape in any direction tool is moved. 1/8 inch shank fits in any rotary tool. Made of solid carbide for 30 times longer life than steel. Carbide Router Drill Set includes: No.60717 1/16 inch cutting diameter, No.60718 3/32 inch cutting diameter and No.60719 1/8 inch cutting diameter. |
 |
$36.00 |
| 80245 | FISH TAIL ROUTER, 1/32 INCH Long lasting carbide router bit with special 'fish tail' ends cuts smooth, flat bottom holes in wood, hard plastic and fiberglass. 1/8 inch shank makes it ideal for use in the No.82033 Dremel Router or No.60485 Shaper Table Attachment. Can also be used in a drill press. Diamond pattern milled into side lets you smooth or shape edges of thin wood. 1-1/2 inches long. |
 |
$11.75 |
| 80246 | FISH TAIL ROUTER, 1/16 INCH Long lasting carbide router bit with special 'fish tail' ends cuts smooth, flat bottom holes in wood, hard plastic and fiberglass. 1/8 inch shank makes it ideal for use in the No.82033 Dremel Router or No.60485 Shaper Table Attachment. Can also be used in a drill press. Diamond pattern milled into side lets you smooth or shape edges of thin wood. 1-1/2 inches long. |
 |
$11.75 |
| 80247 | FISH TAIL ROUTER, 3/32 INCH Long lasting carbide router bit with special 'fish tail' ends cuts smooth, flat bottom holes in wood, hard plastic and fiberglass. 1/8 inch shank makes it ideal for use in the No.82033 Dremel Router or No.60485 Shaper Table Attachment. Can also be used in a drill press. Diamond pattern milled into side lets you smooth or shape edges of thin wood. 1-1/2 inches long. |
 |
$11.75 |
| 80248 | FISH TAIL ROUTER, 1/8 INCH Long lasting carbide router bit with special 'fish tail' ends cuts smooth, flat bottom holes in wood, hard plastic and fiberglass. 1/8 inch shank makes it ideal for use in the No.82033 Dremel Router or No.60485 Shaper Table Attachment. Can also be used in a drill press. Diamond pattern milled into side lets you smooth or shape edges of thin wood. 1-1/2 inches long. |
 |
$11.75 |
| 80254 | 4-PIECE FISH TAIL ROUTER SET These long lasting carbide router bits with special 'fish tail' ends cut smooth, flat bottom holes in wood, hard plastic and fiberglass. 1/8 inch shanks make them ideal for use in the No.82033 Dremel Router or No.60485 Shaper Table Attachment. Can also be used in a drill press. Diamond pattern milled into side lets you smooth or shape edges of thin wood. 1-1/2 inches long. Router Bit Set includes one each of the following bits: 1/32 inch cutting diameter, 1/16 inch cutting diameter, 3/32 inch cutting diameter and 1/8 inch cutting diameter. |
 |
$37.50 |
| 82544 | ROUTER BITS (SET OF 6) Router bits for putting a decorative edge on wood and for making miniature molding. Use with Dremel rotary tool with shaper or router attachment. 1/8 inch shank. |
 |
$30.00 |
| 83152 | DREMEL PLUNGE ROUTER ATTACHMENT Use this Plunge Router Attachment with your rotary tool for edging, grooving, freehand routing and circular cuts. Includes spring-loaded rotary tool mounting plate with twin handles for accurate plunge routing. Features a quick-release depth stop, depth gauge, clear base for good visibility, 0 to 5 inch edge guide. Also cuts circles up to 11 inches in diameter. Fits Dremel models 275, 285, 300, 395, 398, 800, 400XPR and 4000. |
 |
$30.00 |
For your convenience, we accept VISA and MasterCard.
Please note price and availability are subject to change.