Hobby-Worx Logo
Header01

Home     Product Lists     Order Form     Contact Us     Links     Show Schedule

"Serious stuff for the model railroad buff"

ELECTRONIC ITEMS and MOTORS

15232 MICROLUX MEDIUM DUTY TRANSFORMER (1.8 AMP, 12v DC)

This Medium Duty, 1.8 amp output, Variable Speed Transformer provides the 12v DC power for our palm-size miniature power tools #15225, 15226, 15230 and 82088 only. It contains special feedback circuitry that automatically boosts the power to the tool when it is under load so that the speed remains constant. Plugs into standard 110v AC household outlet.		 15232 $52.00
80766 FOOT SWITCH (7 AMPS MAX. CAPACITY)

Turns Your Power Tools On/Off Hands-Free.
This high quality industrial foot switch is ideal for use with airbrush compressors, scroll saws, disk sanders, drill presses, etc. Press pedal for 'on,' release for 'off.' Has no-slip rubber pads on both sides. 7 amp max. capacity. 6' cord.		 80766 $37.00
82090 ANIMATION GEARMOTOR

Brings Your Diorama to Life.
Make your own rotating signs, waterwheels, carousels, railroad turntables, machinery, moving figures and other special effects that will set your diorama or model railroad apart from others. 2 inches diameter x 1 inch long lifetime-lubricated, high-torque 110v AC gearmotor has a .275 inch (7mm) diameter x 5/8 inch (16mm) long shaft that turns at a constant 2.5 rpm. Linkages attach easily to 1/8 inch (3.18mm) cross hole in shaft. Includes convenient mounting flanges. 6 foot cord includes on/off switch. Stall torque: 6 in-lbs/min.		 82090 $17.00
82106 ELECTRONIC BEACON FLASHER

A Brilliant Idea for Your Lighthouse Model.
Our special light circuitry simulates the appearance of a lighthouse beacon without using complicated mechanisms. Instead of just flashing, our Electronic Beacon Flasher ramps up the intensity of the lamp to a brilliant burst, then lets it slowly die off...just like a rotating beam of light. Includes plug-in 6v DC transformer, 1-3/4 inches long x 5/8 inch wide x 5/8 inch high circuit board, 1/2 inch long x 5/32 inch dia. bulb, flash-rate adjustment control, all wiring and instructions.		 82106 $25.00
82611 MICRO SWITCHES (PKG. OF 10)

for Animation, Train Contol, Special Effects and More.
Just a light touch (only 35 grams) activates the electrical power-routing contacts in these micro switches. Use them to control animation and special effects, activate indicator lights on control panels, ring bells, route power to railroad switch frogs, etc. Single-pole, double-throw contacts switch power from one terminal to another, or make or break a circuit depending on hookup. Small size (only 1/4 inch x 1/2 inch x 3/4 inch) to fit in tight places. Contacts rated 1 amp. Includes wiring diagrams. Sold in a package of 10.		 82611 $19.00
82652 DIGITAL MULTIMETER

Monitors Electrical Performance, Pinpoints Trouble Spots.
Ergonomically designed, easy-to-read, highly accurate digital multimeter has large (5/8 inch high) LCD numerals which display AC and DC voltages to 600v, DC current to 10 amps and electrical resistance to 2M ohms. Also checks diodes and transistors for proper operation. Hold button retains last reading. Includes two 24 inch long test leads/probes, soft-touch contoured grip with convenient pop-out stand, instructions and 9v battery. Color may vary.		 82652 $20.00
82694 VARIABLE SPEED FOOT-OPERATED RHEOSTAT, 4 AMPS MAX.

For 82889 MicroLux 5 Inch Disk Sander and other power tools lets you adjust speed to suit material. 4 amps maximum.		 82694 $38.00
82722 MOTORIZED PLANETARY GEARBOX

Motorized Gearbox System for Working Models and Animation Projects.
Our miniature DC gearmotor includes 4 color-coded planetary gearsets (3:1, 4:1, 5:1, and 6:1 speed reduction ratios) that you stack in various combinations to provide the high-torque, low output speed you need for powering your working model or animation project. The high-efficiency permanent-magnet motor runs 8,500 rpm at 6 volts to 19,680 rpm at 24 volts and is polarity reversible. 14 different gearbox combinations provide complete output speed range from 13.8 to 6,560 rpm.
Specifications: Output shaft is 4mm (5/32 inch) dia. x 11mm (7/16 inch) lg. Overall size with all 4 gearboxes installed is 1-3/8 inch sq. x 4-1/4 inch lg. Each gearset is 5/16 inch thick. Motor size: 1-3/32 inch dia. x 1-1/2 inch lg. Maximum motor torque at 24v: 700 gm-cm (multiply by gear ratio to obtain output torque). Typical current at normal load at 12v: .75a. Stall current at 12v: 3.9 a.; at 24v: 6.5a. Maximum voltage: 24v DC.		 82722 $30.00
82884 FLAT CAN MOTOR

Transform Balky Locomotives into Smooth Performers with Our Premium Quality Flat Can Motor.
Use our premium quality, high-torque permag motor to upgrade balky, noisy locomotives into smooth running, powerful haulers. The 5-pole, skew-wound, balanced armature and oil-impregnated bronze sleeve bearings provide lurch-free starting and silky-smooth slow speed running. And the narrow profile of the 'flat can' design fits into the hoods of HO diesels or the fireboxes of steamers. Can also be used for larger-scale narrow gauge locomotives, trolleys and rail cars. Compatible with either straight DC or DCC systems. Specifications:
No load @ 12v: 9,800rpm/.06a
Typical 24gm-cm load @12v: 8,755rpm/.25a
Stall torque @12v: 160 gm-cm/1.50a
2mm double-ended shaft.		 82884 $22.00
83163 BATTERY ELIMINATOR FOR MICRO-CAMERA

Powers our 83740 Wireless Micro-Cameras directly from tracks powered by DCC, MTH-DCS and Lionel TMCC systems. Eliminates the hassle and cost of replacing batteries.		 83163 $30.00
83257 TOGGLE SWITCH (3-POLE, DOUBLE THROW)

Three-pole, double throw miniature toggle switch for activating 83201 Switch Tender and routing switch frog polarity. Also used with 84389 - 84398 Sound Modules.		 83257 $4.50
83542 SYMPHONY 77 SOUND STATION

Railroad Sounds Make Your Layout Come Alive.
The conductor shouts, 'All aboard!' You hear the release of steam, the bell sounds, and you're off. Whistle for the grade crossing...hear the sounds of the crossing gate bell and the clickety-clack of steel wheels on steel rail. MRC equipped its Sound Station with high-quality digital recordings of actual steam and diesel train sounds -- 25 in all -- that make your railroad come alive. Includes 2 speakers with powerful, self-contained amplifier, sound-on-sound capability, and hand-held controller with volume control and 8 foot cord. Sounds include: Diesel horns, steam release, bell, steam chuff, conductor, steam whistles, coupling, rail clack, brake, crossing gate, and diesel engine. Plugs into 110v AC wall outlet.		 83542 $73.00
83544 HEAT SHRINK TUBING ASSORTMENT WITH STORAGE BOX, 127 PIECES

Protect Your Electrical Connections with Shrink Tubing.
Heat Shrink tubing makes wiring jobs look neat and prevents shorting. After soldering or crimping the connection, slip the tubing over the joint and use a heat gun to shrink in place. 127-piece assortment includes 7 sizes from 1/16 inch dia. x 1-1/2 inches long to 1/2 inch dia. x 3-3/8 inches long. Trim to length with scissor or wire cutter. Includes compartmented storage box.		 83544 $7.00
83647 FIRE EFFECT CIRCUIT

Fire Effect Circuit includes 3 LEDs with a random flickering flame effect (note: LED's have a clear body, but will flicker with a red/orange color). Requires a power supply with an output of 9 to 16 volts AC or DC. Circuit board is 2 inches wide x 3-1/8 inches long. 		83647 $36.00
83648 ARC WELDER CIRCUIT

Arc Welder Circuit includes a red 'hot glowing metal effect' LED and a blue welding-effect LED. The unit is powered by 12 to 16 volts AC or DC. Circuit board is 2 inches wide x 3-1/2 inches long.		 83648 $36.00
83649 GRADE CROSSING FLASHER CIRCUIT

Grade Crossing Flasher Circuit works on single or double track. It may be operated by reed switches, IRDOT infra red detectors, or manually with a switch. Requires a 12 volt supply, DC or AC. Includes two pairs of LEDs for the crossing lights. While the lights are flashing, an on-board relay is activated to operate gates moved by a slow motion switch motor (not included). Circuit board is 2-1/2 inches wide x 3-1/4 inches long.		 83649 $38.75
83690 DUAL TIMER CIRCUIT

Dual Timer Circuit has two separate timing circuits. Each of these, when activated, switches relay contacts for an adjustable time. Requires a power supply output of 12 volts DC or 16 volts AC. Circuit board is 2-3/4 inches wide x 3-1/4 inches long.		 83690 $43.00
83740 WIRELESS MICRO-CAMERA SYSTEM WITH SOUND, 2.4 GHz

Wireless Micro-Camera System includes color camera (.900 inch square x 1 inch deep) with adjustable-focus lens, internal microphone for sound transmission, camera connector for 9v battery or wall transformer, 2.4 GHz video/audio receiver, 2 wall transformers, camera mounting plate, plus cable for connection to VCR/TV.
Typical transmission range: 675 feet (no obstacles in path). Weight: camera alone 0.7 oz; with battery 2.5 oz. Battery lasts up to 12 hours. Min. illumination 1 Lux. Equipment is not waterproof. Wall transformers may vary.		 83740 $105.00
83858 I CONNECTOR KIT, PKG. OF 10

Mini Connector Kit for Model Electronics.
Kit makes it easy to disconnect motors, lights and other circuitry located inside your models. 2-wire miniature connector bodies are only 3/16 x 1/4 inch x 3/8 inch long when joined. Connector halves snap together to prevent accidental parting. Each connector assembles in just a few minutes. Includes 7 inch wire leads and heat-shrink tubing to prevent shorts. Requires the use of a wire stripper and soldering iron. 4 amp capacity.		 83858 $13.00
83914 ARC WELDER CIRCUIT WITH SOUND

Arc Welder Circuit with sound includes a red 'hot glowing metal effect' LED and a blue welding-effect LED, accompanied by realistic welding audio. The unit is powered by 12 to 16 volts AC or DC. Includes 2-1/2 inch diameter, 8 ohm speaker. Circuit board is 2 inches wide x 3-1/2 inches long.		 83914 $66.00
84022 SUITCASE CONNECTORS, IDC #905 RED (PKG. OF 25)

'Suitcase Connectors' Eliminate the Stripping and Soldering of Under-Layout Wiring.
Dubbed 'Suitcase Connectors' by expert model railroaders, these Insulation Displacement Connectors (IDC's) let you connect track feeder wires to main bus (power supply) wires without having to strip or solder. Simply place the connector over the wires and crimp the metal tab with pliers. The tab pierces the insulation and locks the wires together. Snap the lid shut, and you're done! Our IDC's are top-quality 3M Scotchlok brand.
#84022 Suitcase Connectors (IDC #905 Red) for bus sizes #14-18 (max insulation OD .145 inch) with feeder sizes #18-22 (max insulation OD .110 inch). Package of 25.		 84022 $8.00
84023 SUITCASE CONNECTORS, IDC #567 BROWN (PKG. OF 25)

'Suitcase Connectors' Eliminate the Stripping and Soldering of Under-Layout Wiring.
Dubbed 'Suitcase Connectors' by expert model railroaders, these Insulation Displacement Connectors (IDC's) let you connect track feeder wires to main bus (power supply) wires without having to strip or solder. Simply place the connector over the wires and crimp the metal tab with pliers. The tab pierces the insulation and locks the wires together. Snap the lid shut, and you're done! Our IDC's are top-quality 3M Scotchlok brand.
#84023 Suitcase Connectors (IDC #567 Brown) for bus sizes #10-12 (max insulation OD .190 inch) and feeder sizes #14-18 (max insulation OD .145 inch). Package of 25.		 84023 $11.75
84024 FAHNESTOCK CLIPS (PKG. OF 25)

So That's What They're Called.
We used these connectors years ago to hook up our toy trains. We never knew their name, but knew they worked just great! Simply push down on the tab and insert the stripped end of the wire for a long-lasting electrical connection. Disconnects just as easily. Use for wires #16 and smaller. Mount with #6 screws (not included). Package of 25.		 84024 $8.00
84040 SIMPLE SHUTTLE CIRCUIT

Automatically cycles a train from one end of the line to the other. Stop-time is adjustable from 10 to 100 seconds. For a single train, place Simple Shuttle at one end and a Standard IRDOT-1 at the other. To cycle up to 6 different trains on stub tracks, us the Simple Shuttle with an IRDOT-P on each stub to automatically throw the switches. Requires 12vDC power supply. Use your own power pack to power the train. Maximum current draw for each train: 3 amps.		 84040 $44.00
84107 BUTT SPLICE CONNECTOR, IDC UR2 WHITE/RED (PKG. OF 25)

Makes a moisture-resistant connection between 2 or 3 pigtail solid wire ends sizes 19-26 (max insulation OD .082 inch). Package of 25.		 84107 $6.00
84108 BUTT SPLICE CONNECTOR, IDC 314U WHITE (PKG. OF 25)

Makes a connection between 2 or 3 pigtail wire ends sizes 14-22 (max insulation OD .150 inch). Package of 25.		 84108 $18.00
84109 SUITCASE CONNECTORS, IDC 558 PINK (PKG. OF 25)

Eliminate the Stripping and Soldering of Under-Layout Wiring.
Dubbed 'Suitcase Connectors' by expert model railroaders, these Insulation Displacement Connectors (IDC's) let you connect track feeder wires to main bus (power supply) wires without having to strip or solder. Simply place the connector over the wires and crimp the metal tab with pliers. The tab pierces the insulation and locks the wires together. Snap the lid shut, and you're done! Our IDC's are top-quality 3M Scotchlok brand.
84109 Suitcase Connectors (IDC 558 pink) for bus and feeder sizes 16-22 (max insulation OD .120 inch). Package of 25.		 84109 $10.00
84215 LARGE SIZE HEAT SHRINK TUBING ASSORTMENT

Shrink Tubing Protects Electrical Connections.
55-piece assortment of large size heat shrink tubing in 4 diameters from .393 inch dia. x 1-3/4 inches long through 1-3/8 inch dia. 2-3/8 inches long. Use for repairing electrical plugs, making batteries from a group of cells, bundling wires, covering DCC decoders, etc. Includes compartmented storage box.		 84215 $7.25
84317 HEAVY DUTY TRANSFORMER (5 AMP, 12v DC)

This Heavy Duty, 5 amp output, Variable Speed Transformer provides the 12v DC power for all our palm-size miniature power tools, but is especially recommended for use with Belt Sander 15229, Power Plane 15228, Sword Saw 81858, High Torque Drill 82822 and Right Angle Sander/Drill 82376. Transformer contains special feedback circuitry that automatically boosts the power to the tool when it is under load so that the speed remains constant. Provides twice as much power and torque as transformer 15232. Plugs into standard 110v AC household outlet.		 84317 $58.00
84420 MOMENTARY PUSH BUTTON

Momentary Push Button to trigger sound cycle when used with sound modules, plus other uses.		 84420 $2.00
84421 SPEAKER FOR SOUND MODULES

High-fidelity speaker for sound modules and other uses. 2 inches x 2-3/4 inches x 1-5/8 inches deep. 8 ohms, 3 watts.		 84421 $7.00
84422 FIBER OPTICS EXPERIMENTERS KIT

Fiber Optics Light the Way to Special Effects
Fiber Optics add brilliant points of light to miniature space vehicles, locomotives, ships, planes, autos, structures and more! How it works: Bendable plastic, optically transparent strands transmit light like a pipe carries water. Simply drill a hole where you want the light and insert a strand. Route the strands from your model to the light source (hidden in the base of your model). Turn on the switch to light your model. Our Experimenters Kit includes an LED light source, a bundle of approx. 50 micro-size (.018 inch diameter) fiber optic strands (pre-installed in the light source), and a battery holder (for two AA cells, not included) with integral on/off switch. Strands are 12 inches long; can be cut to length and beveled for special effects.		 84422 $15.00
ACL-422 ALLIGATOR CLIP LEAD SET

 ACL-422 $7.00
GR-20235 GRIP DIGITAL MULTI TESTER - 19 RANGE

 GR-20235 $9.00

RESISTORS

 Resistors
59K8325 1/4 WATT - 1.1K OHM. 25 PACK

First quality general purpose carbon film resistors for use in hobby appliances. 5% resistance tolerance.		 $3.00
58K5019 1/4 WATT -1.8 OHM. 25 PACK

First quality general purpose carbon film resistors for use in hobby appliances. 5% resistance tolerance.		 $3.00
59K8360 1/4 WATT - 2.7 OHM. 25 PACK

First quality general purpose carbon film resistors for use in hobby appliances. 5% resistance tolerance.		 $3.00
58K5055 1/4 WATT - 470K OHM. 25 PACK

First quality general purpose carbon film resistors for use in hobby appliances. 5% resistance tolerance.		 $3.00
58K5062 v

First quality general purpose carbon film resistors for use in hobby appliances. 5% resistance tolerance.		 $3.00
___ 1/4 WATT - 620 OHM. 25 PACK

First quality general purpose carbon film resistors for use in hobby appliances. 5% resistance tolerance.		 $3.00
58K5968 >1/4 WATT - 680 OHM. 25 PACK

First quality general purpose carbon film resistors for use in hobby appliances. 5% resistance tolerance.		 $3.00
58K5053 4.7 OHM CARBON FILM RESISTOR, 25 PACK

Resistance tolerance. + or - 5% power rating 0.25w 		$3.00
59K8360 2.7 OHM CARBON FILM RESISTOR, 25 PACK

Resistance tolerance. + or - 5% power rating 0.25w		 $3.00
59K8384 5.1 OHM CARBON FILM RESISTOR, 25 PACK

Resistance tolerance. + or - 5% power rating 0.25w 		$3.00
___ 820OHM CARBON FILM RESISTOR, 25 PACK

Resistance tolerance. + or - 5% power rating 0.25w		 $3.00
___ 150K OHM CARBON FILM RESISTOR, 25 PACK

Resistance tolerance. + or - 5% power rating 0.25w		 $3.00
___ 300K OHM CARBON FILM RESISTOR, 25 PACK

Resistance tolerance. + or - 5% power rating 0.25w		 $3.00
58K5060 5.6 OHM CARBON FILM RESISTOR, 25 PACK

Resistance tolerance. + or - 5% power rating 0.25w		 $3.00
1N4001 DIODE RECTIFIERS 1AMP 50 VOLT 10PCS

 $3.00
DO-41 ZENER DIODES 10 PACK

1/4 Watt - 820 ohm. First quality general purpose carbon film resistors for use in hobby appliances. 5% resistance tolerance.		 $3.00

SWITCHES

PBS-11R MOMENTARY OFF-ON RED

 NoPhoto $0.75
PBS-11B MOMENTARY OFF-ON BLACK

 NoPhoto $0.75
SMTS-101 SPST

 NoPhoto $1.00
SMTS-103 SPDT C/OFF

 NoPhoto $1.50
SMTS-202 DPDT ON-NONE 0N

 NoPhoto $1.50
SMTS-303 DPDT C/OFF

 NoPhoto $1.50
R1829B SPST MOMENTARY OFF-ON BLACK

 NoPhoto $1.25
R1829R SPST MOMENTARY OFF-ON RED

 NoPhoto $1.25

INCANDESCENT BULBS

82590-G1 GRAIN-OF-WHEAT LAMPS GREEN 1 EACH

Miniature lamps bring attention to your models like nothing else, These grain-of-wheat size (1/8 inch dia. x 3/8 inch long) bulbs are 12-14v. AC/DC, .075 amp. 6 inch leads.		 82590G $1.00
82590-G25 GRAIN-OF-WHEAT LAMPS GREEN 25 PACK

Miniature lamps bring attention to your models like nothing else, These grain-of-wheat size (1/8 inch dia. x 3/8 inch long) bulbs are 12-14v. AC/DC, .075 amp. 6 inch leads.		 82590G $20.00
82590-R1 GRAIN-OF-WHEAT LAMPS RED 1 EACH

Miniature lamps bring attention to your models like nothing else, These grain-of-wheat size (1/8 inch dia. x 3/8 inch long) bulbs are 12-14v. AC/DC, .075 amp. 6 inch leads.		 82590R $1.00
82590-R25 GRAIN-OF-WHEAT LAMPS RED 25 PACK

Miniature lamps bring attention to your models like nothing else, These grain-of-wheat size (1/8 inch dia. x 3/8 inch long) bulbs are 12-14v. AC/DC, .075 amp. 6 inch leads.		 82590R $20.00
82590-W1 GRAIN-OF-WHEAT LAMPS WHITE 1 EACH

Miniature lamps bring attention to your models like nothing else, These grain-of-wheat size (1/8 inch dia. x 3/8 inch long) bulbs are 12-14v. AC/DC, .075 amp. 6 inch leads.		 82590W $1.00
82590-W25 GRAIN-OF-WHEAT LAMPS WHITE 25 PACK

Miniature lamps bring attention to your models like nothing else, These grain-of-wheat size (1/8 inch dia. x 3/8 inch long) bulbs are 12-14v. AC/DC, .075 amp. 6 inch leads.		 82590W $20.00
82590-Y1 GRAIN-OF-WHEAT LAMPS YELLOW 1 EACH

Miniature lamps bring attention to your models like nothing else, These grain-of-wheat size (1/8 inch dia. x 3/8 inch long) bulbs are 12-14v. AC/DC, .075 amp. 6 inch leads.		 82590Y $1.00
82590-Y25 GRAIN-OF-WHEAT LAMPS YELLOW 25 PACK

Miniature lamps bring attention to your models like nothing else, These grain-of-wheat size (1/8 inch dia. x 3/8 inch long) bulbs are 12-14v. AC/DC, .075 amp. 6 inch leads.		 82590Y $20.00
83155 GRAIN-OF-RICE LAMPS, CLEAR (PKG. OF 10)

DCC 'Friendly'.
These grain-of-rice sized lamps are specially manufactured for Micro-Mark with a 12v, 30ma rating so they can be wired directly to the function outputs of model railroad DCC decoders without fear of electronic overload or plastic-melting heat generation. Measuring a compact 3/32 inch dia. x 3/16 inch long, these lamps are made of high-grade glass, with long-life filaments and durable 6 inch leads. Of course, they can be used for all types of micro-lighting applications. Each package contains 10 clear lamps.		 83155 $18.00
83156-G GRAIN-OF-RICE LAMPS, GREEN (PKG. OF 1)

Same as 83155. Green lamps sold individualy.		 83156-G $2.00
83156-R GRAIN-OF-RICE LAMPS, RED (PKG. OF 1)

Same as 83155. Red lamps sold individualy.		 83156-R $2.00
83156-W GRAIN-OF-RICE LAMPS, WHITE (PKG. OF 1)

Same as 83155. White lamps sold individualy.		 83156-W $2.00
83156-W10 GRAIN-OF-RICE LAMPS, WHITE (PKG. OF 10)

Same as 83155. White lamps 10 pack.		 83156-W $18.00
83156-Y GRAIN-OF-RICE LAMPS, YELLOW (PKG. OF 1)

Same as 83155. Yellow lamps sold individualy.		 83156-Y $2.00
FC-0018-5 CLEAR. 1.5 VOLT, 15 MA LAMP 5 PACK

 NoPhoto $10.00

INFRA-RED DETECTOR OF TRAINS

Beam of Invisible Light Detects the Location of Model Trains

Our Infra Red Detector Of Trains (IRDOT) emits a beam of invisible infrared light through a small hole drilled between the ties of your model railroad track. When a locomotive or railcar passes overhead, it reflects this beam through the same hole to IRDOT's detector. This, in turn, triggers a circuit which turns on a light or energizes a relay. Use it to indicate when a train has reached the end of a hidden siding, is located in a tunnel, has cleared hidden staging yard switches and more. IRDOT's circuitry is independent of track power and detects both powered and unpowered rolling stock without modification. Operation is not affected by room lighting. Circuit board is 1-1/4 Inches wide x 3-1/2 inches long. Requires external 12-16v AC or DC power supply (use the accessory terminals of your power pack or separate transformer). Maximum switched current is 0.1a. Includes red LED for train indication, plus instructions for advanced circuits, signals and easy installation.
83232 IRDOT-1 (INFRA-RED DETECTOR OF TRAINS, STANDARD)

Standard IRDOT-1 mounts to underside of track base board. Emitter/detector pair installs through hole drilled between ties. Trains passing overhead reflect the beam and trip the circuit. Use #60748 #2 x 1/2 inch wood screws (sold separately) for mounting IRDOT circuit board to base board. (2 screws required per IRDOT.)		 83232 $27.50
83233 IRDOT-1EW (INFRA-RED DETECTOR OF TRAINS, EXTENDED WIRE-LEADS)

IRDOT-1EW with extended wire-leads has separate emitter and detector attached to 18 inch long leads for mounting in tight spaces or for use as a beam splitter (trains break the beam and trip the circuit). Use #60748 #2 x 1/2 inch wood screws (sold separately) for mounting IRDOT circuit board to base board. (2 screws required per IRDOT.)		 83233 $33.00
83641 IRDOT-1D (INFRA-RED DETECTOR OF TRAINS, STANDARD)

Standard IRDOT-1D mounts to underside of track base board. Emitter/detector pair installs through hole drilled between ties. Trains passing overhead reflect the beam and trip the circuit. Maximum switched current is 0.1a. Features a 4 to 5 second delay on detection drop-out so that indicating lights don't flicker as a train passes over the detector. Use #60748 #2 x 1/2 inch wood screws (sold separately) for mounting IRDOT circuit board to base board. (2 screws required per IRDOT.)		 83641 $29.50
83642 IRDOT-1DEW (INFRA-RED DETECTOR OF TRAINS, EXTENDED WIRE-LEADS)

IRDOT-1DEW with extended wire-leads has separate emitter and detector attached to 18 inch long leads for mounting in tight spaces or for use as a beam splitter (trains break the beam and trip the circuit). Features a 4 to 5 second delay on detection drop-out so that indicating lights don't flicker as a train passes over the detector. Maximum switched current is 0.1a. Use #60748 #2 x 1/2 inch wood screws (sold separately) for mounting IRDOT circuit board to base board. (2 screws required per IRDOT.)		 83642 $35.00
83643 IRDOT-2 (INFRA-RED DETECTOR OF TRAINS, STANDARD)

Standard IRDOT-2 mounts to underside of track base board. Emitter/detector pair installs through hole drilled between ties. Trains passing overhead reflect the beam and trip the circuit. Features an on-board relay to isolate switched circuitry and increase maximum switched current to 3a. Use #60748 #2 x 1/2 inch wood screws (sold separately) for mounting IRDOT circuit board to base board. (2 screws required per IRDOT.)		 83643 $31.00
83644 IRDOT-2EW (INFRA-RED DETECTOR OF TRAINS, EXTENDED WIRE-LEADS)

IRDOT-2EW with extended wire-leads has separate emitter and detector attached to 18 inch long leads for mounting in tight spaces or for use as a beam splitter (trains break the beam and trip the circuit). Features an on-board relay to isolate switched circuitry and increase maximum switched current to 3a. Use #60748 #2 x 1/2 inch wood screws (sold separately) for mounting IRDOT circuit board to base board. (2 screws required per IRDOT.)		 83644 $36.50
83645 IRDOT-2D (INFRA-RED DETECTOR OF TRAINS, STANDARD)

Standard IRDOT-2D mounts to underside of track base board. Emitter/detector pair installs through hole drilled between ties. Trains passing overhead reflect the beam and trip the circuit. Features a 4 to 5 second delay on detection drop-out so that indicating lights don't flicker as a train passes over the detector plus an on-board relay to isolate switched circuitry and increase maximum switched current to 3a. Use #60748 #2 x 1/2 inch wood screws (sold separately) for mounting IRDOT circuit board to base board. (2 screws required per IRDOT.)		 83645 $32.00
83646 IRDOT-2DEW (INFRA-RED DETECTOR OF TRAINS, EXTENDED WIRE-LEADS)

IRDOT-2DEW with extended wire-leads has separate emitter and detector attached to 18 inch long leads for mounting in tight spaces or for use as a beam splitter (trains break the beam and trip the circuit). Features a 4 to 5 second delay on detection drop-out so that indicating lights don't flicker as a train passes over the detector plus an on-board relay to isolate switched circuitry and increase maximum switched current to 3a. Use #60748 #2 x 1/2 inch wood screws (sold separately) for mounting IRDOT circuit board to base board. (2 screws required per IRDOT.)		 83646 $38.00
83831 IRDOT-P (INFRA RED DETECTOR OF TRAINS, POINTS/SWITCHING)

IRDOT-P mounts to underside of track base board. Emitter/ detector pair installs through hole drilled between ties. Trains passing overhead reflect the beam and trip the circuit. Has additional relay to activate solenoid-type switch machines. Relay contacts provide power to switch machine for 1 second; 10 amp capacity.		 83831 $40.50
83864 IRDOT-PEW (INFRA RED DETECTOR OF TRAINS, POINTS/SWITCHING, EXTENDED WIRE-LEADS)

IRDOT-PEW has separate emitter and detector attached to 18 inch long leads for mounting in tight spaces or for use as a beam splitter (trains break the beam and trip the circuit). Has additional relay to activate solenoid-type switch machines. Relay contacts provide power to switch machine for 1 second; 10 amp capacity. 		83864 $46.00

LEDs

____ Red, Surface Mound.

Outside dimension: 2.0 mm (L) x 1.25 mm (W) x 0.80 mm (H); Source Material: AlGainP - Luminous Intensity - MCD: min 30/max. 80; Reverse Current: 5.0 V; Forward Current: 2.1 V Typical/2.6 max; DC Forward Current: 20-30 Ma Qty: 10PCS		 NoPhoto $3.00
____ White, Surface Mound.

Outside dimension: 2.0 mm (L) x 1.25 mm (W) x 0.80 mm (H); Luminous Intensity - MCD: min 30/max. 80; Reverse Current: 5.0 V; Forward Current: 2.1 V Typical/2.6 max; DC Forward Current: 20-30 mA. Qty: 6pcs		 NoPhoto $5.00
L16WC WHITE 1.6mm 20mA 10pcs

 NoPhoto $20.00
L16RC RED 1.6mm 20mA 10pcs

 NoPhoto $3.00
L16YC YELLOW 1.6mm 20mA 10pcs

 NoPhoto $3.00
L16GC GREEN 1.6mm 20mA 10pcs

 NoPhoto $3.00
____ 2mm GREEN,DIFFUSED. 20 mA. 10pcs

 NoPhoto $3.00
L20GD 2mm GREEN, TOWER TYPE 10pcs

 NoPhoto $3.00
L20YD 2mm YELLOW, TOWER TYPE 10pcs

 NoPhoto $3.00
____ 2mm YELLOW 10pcs

 NoPhoto $3.00
L20RD 2mm RED TOWER 10pcs

 NoPhoto $3.00
____ 2mm RED, DIFFUSED 10pcs

 NoPhoto $3.00
L02SSWC YELGLO, 2mm TOWER TYPE, WATER CLEAR 20 mA. 5pcs

 NoPhoto $10.00
____ White. 2mm TOWER TYPE, WATER CLEAR 20 mA. 5pcs

 NoPhoto $10.00
L02WCW New White. 2mm Tower type. 7000 MDC LED’s

(Blue has been removed). SOURCE MATERIAL: InGaN. EMITTING COLOUR: White. LENS TYPE: Water Clear. LUMINOUS INTENSITY - MCD:6000, TYPICAL/7000MAX. REVERSE VOLTAGE:5.0 V DC. FORWARD VOLTAGE: 3.3V TYPICAL/3.5V MAX DC. FORWARD CURRENT: 20mA. VIEWING ANGLE: +/ 20 degree. LEAD SOLDERING TEMP: 260 degrees C for five seconds. Qty: 10pcs		 NoPhoto $20.00
____ AMBER 3mm ULTRA BRIGHT

Luminous Intensity - MDC: 3000 - Typical: 4000 max.; Reverse Voltage: 5.0 V; DC Forward Voltage: 1.7 V Typical; DC Forward Current: 20-30 Ma Qty: 10pcs		 NoPhoto $10.00
40k0025 - 33c1327 RED, 3mm DIFFUSED 20 mA. 10pcs

 NoPhoto $3.00
____ YELLOW, 3mm DIFFUSED 20 mA. 10pcs

 NoPhoto $3.00
40K0036 GREEN, 3mm DIFFUSED 20 mA. 10pcs

 NoPhoto $3.00
____ RED 3mm MEGA BRIGHT

Luminous Intensity - MDC: 4000 - Typical: 5000 max.; Reverse Voltage: 2.7 V; DC Forward Voltage: 1.8 V Typical/2.0 V max; DC Forward Current: 20 mA Qty: 10pcs		 NoPhoto $10.00
LAS3R+G RED AND GREEN 3mm LED ASSEMBLIES 10pcs

 NoPhoto $20.00
____ YELLOW 3mm SURFACE MOUNT 10pcs

 NoPhoto $2.00
____ RED AND GREEN 3mm FLASHING 10pcs

 NoPhoto $7.00
L203RGD BI COLOUR RED AND GREEN 3mm 2 LEAD 10pcs

 NoPhoto $5.00
L303RGD BI COLOUR RED AND GREEN 3mm 3 LEAD 10pcs

 NoPhoto $7.00
LB03RD RED FLASHING 3mm 10pcs

 NoPhoto $7.00
____ WHITE, COOL 3mm Voltage: 3.5 V - 5.0 V MAX / 2000-3500 MCD 10pcs

 NoPhoto $12.00
____ WHITE, FROSTED 3mm

Resistors for working at 12 V - Luminous Intensity MDC 3000 / Typical 4000 max.		 NoPhoto $12.00
____ White Mega Bright 3mm

Luminous Intensity - MDC: 4000 - Typical/5000 max.; Reverse Voltage: 5.0 V; DC Forward Voltage: 3.3V Typical; DC Forward Current: 20 - 30mA; Resistors for working at 12V Qty 10pcs.		 NoPhoto $12.00
____ NEW WHITE 3mm

7000 MDC LED’s (Blue has been removed). SOURCE MATERIAL: InGaN. EMITTING COLOUR: White. LENS TYPE: Water Clear. LUMINOUS INTENSITY - MCD:6000, TYPICAL/7000MAX. REVERSE VOLTAGE:5.0 V DC. FORWARD VOLTAGE: 3.3V TYPICAL/3.5V MAX DC. FORWARD CURRENT: 20mA. VIEWING ANGLE: +/ 20 degree. LEAD SOLDERING TEMP: 260 degrees C for five seconds. Qty: 10pcs		 NoPhoto $12.00
____ SUPER WHITE 3mm

Luminous Intensity - MDC: 14000 - Typical/16000 max.; Reverse Voltage: 5.0 V; DC Forward Voltage: 3.3V Typical; DC Forward Current: 20 - 30mA; Resistors for working at 12V Qty: 10pcs		 NoPhoto $12.00
____ YELLOW ULTRA BRIGHT 3mm

Voltage: 1.8V - 2.4V / 2000 - 4000 MCD Qty: 10pcs		 NoPhoto $10.00
____ GREEN ULTRA BRIGHT 3mm

Luminous Intensity - MDC: 3000 - Typical: 4000 max.; Reverse Voltage: 5.0V; DC Forward Voltage: 3.3V Typical; DC Forward Current: 20-30 mA Qty: 10pcs		 NoPhoto $10.00
____ BLUE MEGA BRIGHT 3mm

Luminous Intensity - MDC: 3000 - Typical: 4000 max.; Reverse Voltage: 5V; DC Forward Voltage: 3.3V Typical; DC Forward Current: 20 mA Qty: 10pcs		 NoPhoto $12.00
____ YELLOW AND GREEN 3mm 20 mA. QTY: 10pcs

 NoPhoto $3.00
____ RED ULTRA BRIGHT 5mm FLASHING

Luminous Intensity - MDC: 2000 - Typical: 3000 max.; Reverse Voltage: 5.0 V; DC Forward Voltage: 4.5V Typical; DC Forward Current: 20-30 mA Qty: 10pcs		 NoPhoto $10.00
____ AMBER ULTRA BRIGHT 5mm

Luminous Intensity - MDC: 3000 - Typical: 4000 max.; Reverse Voltage: 5.0V; DC Forward Voltage: 1.7V Typical; DC Forward Current: 20-30 mA Qty: 10pcs		 NoPhoto $10.00
____ GREEN ULTRA BRIGHT 5mm

Luminous Intensity - MDC: 3000 - Typical: 4000 max.; Reverse Voltage: 5.0V; DC Forward Voltage: 3.3V Typical; DC Forward Current: 20-30 mA Qty: 10pcs		 NoPhoto $10.00
____ BI COLOUR RED AND GREEN 5mm 3 LEAD Qty: 10pcs

 NoPhoto $7.00
____ SUPER WHITE 5mm

Luminous Intensity - MDC: 14000 - Typical/16000 max.; Reverse Voltage: 5.0V; DC Forward Voltage: 3.3V Typical; DC Forward Current: 20 - 30mA; Resistors for working at 12 V Qty: 10pcs		 NoPhoto $12.00
____ WHITE ULTRA BRIGHT 5mm

Luminous Intensity - MDC: 4000 - Typical/5000 max.; Reverse Voltage: 5.0V; DC Forward Voltage: 3.3V Typical; DC Forward Current: 20 - 30mA; Resistors for working at 12 V Qty: 10pcs		 NoPhoto $12.00
LED-10A BLACK 5mm LED HOLDERS QTY: 10pcs

 NoPhoto $3.00
LED-10B BLACK 3mm LED HOLDERS QTY: 10pcs

 NoPhoto $3.00


For your convenience, we accept VISA and MasterCard.

CreditLogos

Please note price and availability are subject to change.